User Manual- M100

DJI MATRICE 100

User Manual

5. Re-mount the upper plate of the center frame, and tighten the 16 screws (M2.5x5). Orientate the

upper plate so that the notch faces the left of the aircraft (with its tail facing you). Then place the

mounting rails and tighten the 8 screws (M2.5x8).

6. Re-mount the Aircraft Status Indicator, and tighten the two screws (M3x8 self-tapping). Do not

overtighten the screws to avoid damaging the threads.

7. Attach the Gimbal Lock under the gimbal mounting plate. Then tighten the four Phillips screws.

9. Mount the gimbal mounting plate and dampers to the center frame.

8. Connect the other ends of the 10-pin gimbal cable and 8-pin gimbal cable to the corresponding

ports on the Gimbal Lock.

Phillips Screws

Gimbal Mounting Plate

Gimbal Lock

8-pin Port

10-pin Port

Gimbal Lock

The dampers may deteriorate over time. Ensure that all dampers are in good condition before

every ight. Do NOT use worn or broken dampers.