User Manual- M100

DJI MATRICE 100

User Manual

3. Ensure you have followed the previous steps to install the propellers onto their corresponding

mounting plates securely. To ensure the propellers are properly secured, hold the motor in place

with one hand and use your other hand to rotate the propeller in the unlock direction without

pressing down. If the propeller can be removed this way, the propeller and/or the mounting plate

may have become worn and need to be replaced.

Press down on the propellers rmly, and then rotate it in the unlock direction

to detach it from the

motor.

Mounting the Gimbal (Optional)

The Matrice 100 and N1 Flight Controller is only compatible with the DJI Zenmuse X3, X5

series or XT Gimbal and Camera. Other gimbal systems will require custom conguration.

The following procedures apply to the DJI Zenmuse X3 and XT. For details on mounting the Zenmuse

X5 series, refer to the DJI M100-Zenmuse X5 Series Gimbal Installation Kit Installation Guide.

(http://www.dji.com/product/matrice100/info#downloads)

Mounting the Gimbal Lock and Connecting the Cables

1. Remove the two screws (M3x8 self-tapping) on the Aircraft Status Indicator, and then remove the

indicator gently to avoid damaging the cables.

Aircraft Status Indicator

Handle the indicator

cable gently