Installation Guide

DJI M100

ZENMUSE X5 Series Gimbal Installation Kit

6. Mount the new upper plate onto the center frame and tighten the 16 screws (M2.5x5). Then,

mount the new mounting rails A and B, and tighten the eight screws (M2.5x8).

7. Re-mount the Aircraft Status Indicator and tighten the two screws (M3x8 self-tapping). Do not

over tighten the screws to avoid damaging the threads.

Notch

Aircraft Tail

Aircraft Status Indicator

M3x8 self-tapping

Back Wire Outlet

Front Wire Outlet

M2.5x8

M2.5x5

Mounting Rail A

Mounting Rail B