Installation Guide

DJI M100

ZENMUSE X5 Series Gimbal Installation Kit

3. Mount the Gimbal Mounting Plate

Connect the other ends of the 10-pin and 8-pin gimbal cables to their corresponding ports on

the Gimbal Lock.

Mount the Gimbal Mounting Plate and dampers to the Gimbal Mounting Brackets.

The dampers may deteriorate over time. Ensure that all dampers are in good condition

before each ight, and NEVER use worn or broken dampers.

4. Mount the Gimbal

Make sure the aircraft is powered off when mounting the gimbal.

Zenmuse X5

Rotate the Gimbal Lock to the unlocked position.

Align the key on the damping plate with the slot on the gimbal’s pan motor.

While aligning the white lines on the Gimbal Connector and Gimbal Lock, insert the Gimbal

Connector.

Rotate the Gimbal Lock to the locked position.

10-pin Port

8-pin Port

Key

Slot