Installation Guide

DJI M100

ZENMUSE X5 Series Gimbal Installation Kit

Mounting the Gimbal

The aircraft will weigh about 3.1 kg after the X5 series gimbal is attached. Be careful not to

mount additional components, such as extra battery compartments or the DJI Guidance,

which may cause it to exceed the maximum takeoff weight.

1. Mount the mounting rails C and D onto the center frame’s lower plate and tighten the eight

screws (M2.5x8).

2. Mount the Gimbal Mounting Bracket A onto the new upper plate and tighten the two screws

(M3x5). Then mount the two Gimbal Mounting Brackets B onto the lower plate’s mounting rails

and tighten the six screws (M2.5x5).

Mounting Rail C

M2.5x8

M2.5x5

Mounting Rail D

M3x5

Gimbal Mounting

Bracket A

Gimbal Mounting

Bracket B

M2.5x5