Installation Guide

DJI M100

ZENMUSE X5 Series Gimbal Installation Kit

5. Pull the battery’s power extension cable through the hole on the battery cover and connect it to

the center frame’s XT60 port.

6. Close the battery cover and tighten the screw.

XT60 Port

Battery Power

Extension Cable

Replacing the Landing Gear Leg

1. Unscrew the four landing gear legs from the frame arms and remove them.

2. Slide the new, longer landing gear leg into the notch of the antenna cover and screw it onto

the frame arm.

Be careful not to damage the antennas when replacing the landing gear legs.