Owner's Manual

Table Of Contents

• pitch: Pitch angle (in degrees)

• roll: Roll angle (in degrees)

• yaw: Yaw angle (in degrees)

• vgx: X-axis speed (dm/s)

• vgy: Y-axis speed (dm/s)

• vgz: Z-axis speed (dm/s)

• templ: The lowest temperature of the main board (°C)

• temph: The highest temperature of the main board (°C)

• tof: ToF distance (cm)

• h: Height relative to take-off point (cm)

• bat: Percentage of current remaining battery capacity

• baro: Height detected by barometer (m)

• time: Motor running time (s)

• agx: X-axis acceleration (cm/s2)

• agy: Y-axis acceleration (cm/s2)

• agz: Z-axis acceleration (cm/s2)

Effective Mission Pad Recognition Range

Recognizable height range: 0.3 - 1.2 m

Recognizable range at 0.3 m: 0.4 m×0.4 m

Recognizable range at 1.2 m: 1 m×1 m

Detectable range

0 m

0.3 m

1.2 m

1 m

0.4 m

1 m

0.4 m

If the mission pad is outside of TT's recognition area, TT may not be able to detect the

mission pad, and mid commands will be invalid.

We recommend you place the mission pad on a clear textured surface. Avoid placing it

on pure black or pure white backgrounds, otherwise TT may not be able to recognize the

mission pad.

When using the mission pad, ensure that the ambient light is moderate. Too little or too

much light will affect the recognition of the mission pad.

When the forward-looking camera is used to detect the mission pad, the mission pad

commands mentioned above cannot be used.