Quick Start Guide v1.
DJI Ronin 4D Quick Start Guide DJI Ronin 4D Overview EN 4 5 1 6 8 3 2 7 5. High-Bright Main Monitor 6. TB50 Intelligent Battery and Battery Compartment 7. Main Body 8. Right Hand Grip 1. Gimbal and Camera 2. Base Plate 3. Left Hand Grip 4. Top Handle For more information, read the DJI Ronin 4D User Manual: https://www.dji.com/ronin-4d/downloads Getting Started A. Watching the Tutorials Scan the QR code to watch tutorials on how to get started with DJI Ronin 4D. Tutorials B.
DJI Ronin 4D Quick Start Guide Installation EN A. Mounting the Lens (Using DL Lens as an example) 1. The gimbal is folded by default. Unfold the roll and tilt axes before mounting the lens. Toggle the roll axis lock to the unlocked position, adjust the roll axis as shown, and lock the roll axis. Toggle the tilt axis lock to the unlocked position, adjust the tilt axis as shown, and lock the tilt axis. Roll Lock 3 1 2 Tilt Lock 4 6 5 2.
DJI Ronin 4D Quick Start Guide a. Toggle the tilt axis lock to the unlocked position 1 and loosen the knobs on both sides of the tilt axis 2 EN B. Balancing 1. Balancing the Tilt Axis . b. Check to make sure the camera is not front or back-heavy. If front-heavy, move the camera backward. If back-heavy, move the camera forward. c. The tilt axis is balanced if the camera is steady while tilted forward. Tighten the knobs d. Lock the tilt axis 4 3 . . 2 2 3 1 3 4 2. Balancing the Pan Axis a.
DJI Ronin 4D Quick Start Guide C. Attaching the Hand Grips EN Make sure the lever is on the unlocked position at first. Insert the left hand grip into the mounting port on the main body 1 until there is a clicking sound and push the lever all the way down 2 . Attach the right hand grip in the same way. Click 2 1 D. Attaching the Intelligent Battery Align the Intelligent Battery with the battery compartment and push the battery down until there is a clicking sound. Click E.
DJI Ronin 4D Quick Start Guide Activating DJI Ronin 4D 1. Before powering on Ronin 4D, make sure GIMBAL MODE is toggled to FOLLOW or LOCK, the LOCK switch is in the unlocked position, and the three axes of the gimbal are unlocked. Otherwise, Ronin 4D cannot work properly. Press and hold the power button for 1 second to power on Ronin 4D. 2. Use the provided USB-A to USB-C cable to connect the USB-C port on the main body with a computer.
DJI Ronin 4D Quick Start Guide Balancing the Z Axis EN Power on Ronin 4D and enable the Z axis before balancing the Z axis. 1. Loosen the Z axis lock 1 and press the Z Axis switch 2 to enable Z axis. 2. Follow the prompts on the high-bright main monitor to balance the Z axis by turning the adjustment knob remains horizontal. 3 . The Z axis is balanced if it 2 4D 3 Z Axis Switch 1 Operation Ronin 4D can be used once it has been activated, auto-tuned, and the Z axis has been balanced.
DJI Ronin 4D Quick Start Guide 9. Storage Card Compartment Use to insert an CFexpress2.0 Type B card or DJI PROSSD 1TB card. 11. Display Port Used to connect the high-bright main monitor. 12. Audio Port Includes a 3.5mm microphone port and a headphone port. 13. HDMI Port Used for HDMI output. 10. C1, C2 Buttons Press the C1 button to recenter the gimbal. Press the C2 button to switch between follow and lock mode of the Z axis. 14. DC-IN Port Has an input voltage of 12-30 V.
DJI Ronin 4D Quick Start Guide when not in ActiveTrack. EN Press and hold to start ActiveTrack when in Smart mode with a selected subject. When not in Smart mode, press and hold to switch between Follow and Lock mode. Top Handle High-Bright Main Monitor 4 1 1 4 5 6 7 3 2 3 2 1 1. Top Screw Hole 3/8”-16 with a depth of 10 mm. 2. M Button Press and hold to enter Sport mode. Release to exit from Sport mode. 3. Tilt Slider Used to control the tilt of the gimbal. 4.
WE ARE HERE FOR YOU 在线技术支持 Contact DJI SUPPORT via Facebook Messenger 微信扫一扫 获取技术支持 SUBSCRIBE FOR MORE INFO 关注 DJI 大疆创新及时获取最新资讯 RONIN is a trademark of DJI OSMO. Copyright © 2021 DJI OSMO All Rights Reserved. https://pro.dji.
