Owner's Manual

EN
6
©
2020 DJI OSMO All Rights Reserved.
DJI RS 2 Quick Start Guide
2. Attach the Lower Quick-Release Plate and Lens-Fastening Strap
Toggle the lever on the lower quick-release plate to the unlocked position
1
, then insert
the camera
2
and toggle the lever to the locked position
3
after it is engaged. Attach the
lens-fastening strap to the lower quick-release plate
4
, and bind the strap to the camera
lens
5
. Note that the rubber of the lens-fastening strap must be directly under the lens.
It is recommended to use the lens-fastening strap when using a long or heavy lens, and
always use the lens-fastening strap before enabling SuperSmooth mode.
To remove the camera from the lower quick-release plate, toggle the lever to the unlocked
position and remove the camera while pressing the safety lock beside the lever.
3. Attach the Camera to the Gimbal
Toggle the lever on the camera mounting plate to the unlocked position
1
and insert the
lower quick-release plate
2
. Toggle the lever to the locked position once the camera is
roughly balanced
3
.
2
1
3
Safety Lock
4
3
1
5
2