Owner's Manual

DJI RS 2

Quick Start Guide

E. Powering On/Off and Entering/Exiting Sleep Mode

Press and hold the power button to turn DJI RS 2 on or off. Press twice to enter or exit

sleep mode.

F. Activating DJI RS 2

DJI RS 2 needs to be activated through the Ronin app before using

for the first time.

1. Press and hold the power button to power on the gimbal.

2. Enable Bluetooth on your mobile device and launch the Ronin

app. Note that a DJI account is required to launch the Ronin app.

Once detected in the list of Bluetooth devices, select DJI RS 2

and input the default Bluetooth password: 12345678. Make

sure you are connected to the internet and follow the on-screen

instructions to activate DJI RS 2.

Mounting the Camera

Make sure to prepare the camera before mounting it to DJI RS 2. Remove the lens cap and

check that the battery and memory card are inserted in the camera. Make sure DJI RS 2 is

powered off or in sleep mode before mounting the camera.

1. Attach the Upper Quick-Release Plate

The camera lens and the arrow on the bottom of the upper quick-release plate must face

the same direction. Attach the upper quick-release plate to the camera by tightening the

screw.

DJI RS 2

Creat

User Proﬁle

Status

Device Activation

Activation is required prior to using the

device. To do so, information regarding

your device and DJI account will be

uploaded to DJI. Please agree and

proceed to activation.

Agree and activate

A camera riser is required when using a focus motor or a small camera with a large lens, such as a

Sony A6400 with the Sony FE 24-70 f2.8 GM lens.