Owner's Manual

DJI RS 2 User Manual

Timelapse

In Timelapse, DJI RS 2 triggers the camera to capture still images with the set interval

time and will automatically stop when completed. The duration for the Timelapse and

the frame rate can be set so that DJI RS 2 can calculate the exact number of images

required.

By enabling Push mode, users can manually adjust the pan and tilt axes before starting

the Timelapse. Users can push DJI RS 2 to alter the camera orientation and adjust

the framing. Tap the virtual joystick icon to use the virtual joystick to adjust the camera

orientation.

Motionlapse allows users to set up to ve waypoints so that the camera moves during

the Timelapse.

To adjust the position of a waypoint, adjust the camera to the desired position, and tap

the + icon to conrm the waypoint. You can also use the virtual joystick to control the

pan, tilt, and roll axis as well.

To add another waypoint, move the gimbal to the next waypoint, and tap the + icon

above the grid map. Afterwards, to delete a waypoint, select the waypoint and tap the

trash icon.

After setting up the waypoints, you can either tap Preview to make sure the Motionlapse

includes everything or tap the shutter/record button to start shooting. Make sure the

camera and gimbal have been connected using the corresponding camera control

cable.