Owner's Manual

BG30 Grip and Built-In Battery

The BG30 grip is for handheld use. The built-in battery within the grip has a capacity

of 1950 mAh and the maximum runtime is 12 hours (when the DJI RS 2 is properly

balanced).

Charging

Before using for the rst time, charge the battery grip through the power port using a

charging cable (included) and a USB adapter (not included). It is recommended to use

a USB adapter with QC 2.0 and PD protocol (max. 24 W).

During charging and usage, the battery level indicators indicate the battery level. When

not in use, press the battery level button to check the battery level.

Safety Guidelines

The following terms are used throughout the product literature to indicate various levels

of potential harm when operating this product:

Procedures, which if not properly followed, create a possibility of physical

property damage AND a little or no possibility of injury.

Procedures, which if not properly followed, create the probability of property

damage, collateral damage, and serious injury OR create a high probability of supercial

injury.

USB Power

Adapter

Power Outlet

100 - 240 V

Power Port

High Low

Read the user manual to become familiar with the features

of this product before operating. Failure to operate the

product correctly can result in damage to the product, personal property, and cause

serious injury. This is a sophisticated product. It must be operated with caution and

common sense and requires some basic mechanical ability. Failure to operate this

product in a safe and responsible manner could result in injury or damage to the

product or other property.

This product is not intended for use by children without direct adult supervision.

Do not use with incompatible components or alter this product in any way

outside of the documents provided by SZ DJI OSMO TECHNOLOGY CO.,

LTD. These Safety Guidelines contain instructions for safety, operation and

maintenance. It is essential to read and follow all of the instructions and

warnings in the user manual, prior to assembly, setup or use, in order to

operate the product correctly and avoid damage or serious injury.