User Manual

The status indicatior of the Focus Wheel indicates the calibration status.

Blinking Pattern Descriptions

Solid yellow Focus Motor is connected, but not calibrated

Blinks yellow slowly Calibrating

Solid green Focus Motor is connected and calibrated

Blinks green slowly Point A is set

Blinks green twice Points A and B are set

Focus Motor Control

Press the Focus Motor function button to switch the status indicator between Focus (F), Iris

(I), and (Z) Zoom. Make sure the status indicator is set to the lens that the Focus Motor is

attached to.

Press and hold the Focus Motor function button to turn the status indicator on or off.

Press and hold the Focus Wheel multifunction button to reverse the rotational direction of the

Focus Motor.

Focus Motor Status Indicator Descriptions

Blinking Pattern Descriptions

Blinks red twice Focus Motor error, update rmware

Blinks red slowly Focus Motor is disconnected

Blinks red quickly Focus Motor has stalled

Solid green Calibration complete

Blinks green slowly Working normally

Firmware Update

The Focus Motor rmware is part of the Ronin-S rmware. When new rmware is available,

connect the Focus Motor to the Ronin-S to update.