User Manual

6. If the camera does not have a lens focus ring with a 0.8 m gear, attach the provided gear

strip to the camera lens to use the Focus Motor.

a. Be sure the teeth of the gear strip are facing outward. Line up the gear strip on the focus

ring or the zoom ring on the lens and pull it taut.

b. Press the gear strip into the belt holder while holding it tightly. Be sure the gear strip is

securely in place in the belt holder.

• To loosen the gear strip, push the gear strip outward while holding the belt holder

tightly. DO NOT pull out the gear strip forcibly or the gear strip will get damaged.

• Trim the gear strip to the required length, leaving enough for adjustments (if needed).

7. Use the provided power cable to connect the Focus Motor to the Ronin-S 12 V / 2 A accessory

power port.

Belt holder