User Manual
Table Of Contents
- Using This Manual
- Legends
- Read Before First Usage
- Video Tutorials
- Download the DJI Assistant 2
- Contents
- Product Profile
- Introduction
- At a Glance
- Installation and Wearing
- Usage
- Operating Control
- Connection
- Main Screen
- Controlling the Aircraft
- Video Play
- Charging the Goggles
- Upgrading Firmware
- DJI Assistant 2
- DJI GO 4 App
- Cleaning and Maintenance
- Cleaning the Goggles
- Maintenance of Lenses
- Specifications
18
©
2017
DJI All Rights Reserved.
Cleaning and Maintenance
Be sure to unplug the charger from the power outlet before cleaning and ensure that there are no
cables connected.
Cleaning the Goggles
Wipe and clean the surface of the Goggles with a soft clean cloth.
To clean the facial pad, rst drag it from the left or right side to the inside, then detach the other
parts. Run water over the facial pad, then wipe it with a soft, dry cloth until it is completely dry. Align
the protruding part of the facial pad with the holes on the Goggles body, then press them together
so they are securely attached.
Maintenance of Lenses
Use the cleaning cloth included to wipe the lenses gently.
1. Moisten the cleaning cloth with alcohol or a lens cleaner.
2. Wipe in a circular motion from the center to the outer edges of the lenses.
DO NOT clean the headband padding with alcohol.
The lenses are delicate, please clean them gently. DO NOT scratch them as this will
damage the overall viewing experience.
Store the Goggles in a dry room at room temperature to avoid damage to the lenses from
high temperature and humid environments.