User Manual 2017.10 V1.
Searching for Keywords 4FBSDI GPS LFZXPSET TVDI BT iCBUUFSZw BOE iJOTUBMMw UP mOE B UPQJD *G ZPV BSF VTJOH "EPCF "DSPCBU Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this manual 2 Legends 2 Read Before the First Flight 2 Watch the Tutorial Videos 2 Download the DJI GO 4 App 2 Download the DJI Assistant 2 2 3URGXFW 3URÀOH 6 Introduction 6 Features Highlights 6 Installing the Aircraft 6 Aircraft Diagram 8 Remote Controller Diagram 8 Aircraft 13 Flight Controller 13 Flight Mode 13 Flight Status Indicator 14 Return-to-Home (RTH) 15 Intelligent Flight Mode 19 Vision System and Infrared Sensing System 27 Flight Recorder 3
DJI GO 4 App Equipment 49 Editor 52 SkyPixel 52 Me 52 Flight 54 Flight Environment Requirements 54 Flight Limits and No-Fly Zones 54 3UHÁLJKW &KHFNOLVW Calibrating the Compass 57 Auto Takeoff and Auto Landing 58 Starting/Stopping the Motors 59 6WRS WKH 0RWRU 0LG ÁLJKW Flight Test 60 Appendix 4 49 62 6SHFLÀFDWLRQV Upgrading the Firmware 64 Intelligent Flight Mode 65 After-Sales Information 66 © 2017 DJI All Rights Reserved.
3URGXFW 3URÀOH This section introduces the Phantom 4 Pro / Pro+ and lists the components of the aircraft and remote controller. © 2017 DJI All Rights Reserved.
3URGXFW 3URÀOH Introduction 5IF %+* 1IBOUPN 1SP 1SP JT BO FYUSFNFMZ TNBSU nZJOH DBNFSB XJUI mWF EJSFDUJPOT PG PCTUBDMF TFOTJOH NBEF VQ PG WJTJPO BOE JOGSBSFE TFOTPST NBLJOH JU BCMF UP JOUFMMJHFOUMZ BWPJE PCTUBDMFT EVSJOH nJHIU Its brand new camera offers unprecedentedly image quality for the Phantom, with greater clarity, lower noise, higher resolution photos and videos.
Phantom 4 Pro / Pro+ User Manual 2. Attaching the Propellers Mount the propellers with black propeller rings to the motors with black dots. Mount the propellers with sliver propeller rings to the motors without black dots. Press the propeller down onto the mounting plate and rotate in the lock direction until it is secured. Product Profile 3. Battery Installation Slide battery into the battery compartment according to the arrow’s direction as shown below. .
Phantom 4 Pro / Pro+ User Manual Aircraft Diagram [1] [2] [3] [4] [1] GPS [2] Propellers [6] [3] Motors [5] [4] Front LEDs [5] Gimbal and Camera Product Profile [6] Forward Vision System [7] [8] [9] [7] Intelligent Flight Battery [8] Aircraft Status Indicator [9] Rear Vision System [10] Infrared Sensing System [11] [11] Camera / Linking Status Indicator and Link Button [12] [12] Micro USB Port [10] [13] [13] Camera Micro SD Card Slot [14] Downward Vision System [14] Remote Controller Diagr
Phantom 4 Pro / Pro+ User Manual [5] Battery Level LEDs [8] RTH LED Displays the battery level of the Remote Controller. Circular LED around the RTH button displays RTH status. [6] Status LED [9] Speaker Displays the Remote Controller's system status. Audio output. [7] Power Button Used to turn the Remote Controller on and off. <20> <19> Product Profile <18> [12] Shutter Button <21> Two-stage button, press to take a photo.
Phantom 4 Pro / Pro+ User Manual Phantom 4 Pro (Model: GL300F) [3] Control Stick Controls the orientation and movement of the aircraft. [1] [2] [4] Return Home (RTH) Button Product Profile Press and hold the button to initiate Return to Home (RTH). [3] [8] [7] [4] [5] Battery Level LEDs [5] [6] Displays the battery level of the remote controller. [6] Status LED Displays the remote controller's system status. [1] Antennas [7] Power Button Relays aircraft control and video signal.
Phantom 4 Pro / Pro+ User Manual [17] C1 Button Customizable through the DJI GO 4 app. [18] C2 Button [18] [17] Customizable through the DJI GO 4 app. [19] Power Port Connect to the Charger to charge the battery of the remote controller. [19] Product Profile © 2017 DJI All Rights Reserved.
Aircraft This section introduces the Flight Controller, Vision System, and the Intelligent Flight Battery. 12 © 2017 DJI All Rights Reserved.
Aircraft Flight Controller 5IF 1IBOUPN 1SP 1SP nJHIU DPOUSPMMFS GFBUVSFT TFWFSBM JNQPSUBOU VQHSBEFT 4BGFUZ NPEFT JODMVEF Failsafe and Return-to-Home.
Phantom 4 Pro / Pro+ User Manual Flight Status Indicator The Phantom 4 Pro / Pro+ has Front LEDs and Aircraft Status Indicators. The positions of these LEDs are TIPXO JO UIF mHVSF CFMPX Aircraft Status Indicator Front LED Aircraft The Front LEDs show the orientation of the aircraft. The Front LEDs glow solid red when the aircraft is turned on to indicate the front (or nose) of the aircraft.
Phantom 4 Pro / Pro+ User Manual Return-to-Home (RTH) Return-to-Home (RTH) function brings the aircraft back to the last recorded Home Point. There are three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes these three scenarios in detail. Description GPS Home Point If a strong GPS signal was acquired before takeoff, the Home Point is the location from which the aircraft launched.
Phantom 4 Pro / Pro+ User Manual Smart RTH Use the RTH button on the remote controller or tap the RTH button in the DJI GO 4 app and follow the onscreen instructions when GPS is available to initiate Smart RTH. The aircraft will then automatically return to the last recorded Home Point. Use the remote controller to control the aircraft’s speed or altitude to avoid a collision during the Smart RTH process.
Phantom 4 Pro / Pro+ User Manual Estimated SFNBJOJOH nJHIU based on current battery level. Estimated remaining nJHIU UJNF N/A N/A N/A Precision Landing The Phantom 4 Pro / Pro+ automatically scans and attempts to match the terrain features underneath during Return to Home. When current terrain matches home point terrain, the Phantom 4 Pro / Pro+ will start landing immediately to achieve precision landing. The DJI GO 4 app will show a terrain feature mismatch prompt if matching fails.
Phantom 4 Pro / Pro+ User Manual Aircraft cannot return to the Home Point when GPS signal is weak ([ ] displays grey) or unavailable. If you move the left stick after the aircraft rises above 65 feet (20 meters) but below the pre-set Failsafe RTH altitude, the aircraft will stop ascending and immediately return to the Home Point.
Phantom 4 Pro / Pro+ User Manual • Landing Protection will not be active in the following circumstances: a) When the user is controlling the pitch/roll/throttle sticks (Landing ground detection will re-activate when control sticks are not in use) b) When the positioning system is not fully functional (e.g.
Phantom 4 Pro / Pro+ User Manual 3. Tap once on the target direction and wait for JDPO UP BQQFBS 5BQ BHBJO UP DPOmSN UIF TFMFDUJPO BOE UIF BJSDSBGU XJMM BVUPNBUJDBMMZ nZ UPXBSET UIF UBSHFU EJSFDUJPO *O 'MJHIU (14 P-GPS 12 61% 09:29 AE Aircraft D 30M H 10.0M H.S 10.0 M/S VS 2.0M/S VPS 2.0M DO NOT guide the aircraft to fly towards people, animals, small and fine objects (e.g. tree branches and power lines) or transparent objects (e.g. glass or water).
Phantom 4 Pro / Pro+ User Manual TapFly includes following functions: TapFly Forward Mode TapFly Backward Mode Free Mode Aircraft 5IF BJSDSBGU XJMM nZ UPXBSET UIF 5IF BJSDSBGU XJMM nZ JO UIF PQQPTJUF target. Forward Vision System direction of the target. Rear Vision is active. System is active. 5IF BJSDSBGU XJMM nZ UPXBSET UIF target. The remote controller can be used to maneuver the yaw of the aircraft freely. Obstacle Sensing is disabled in this mode, use it in an unobstructed environment.
Phantom 4 Pro / Pro+ User Manual Using ActiveTrack Ensure the aircraft is in P-mode, then follow the steps below to use ActiveTrack: 1. Take off and hover at least 6 feet (2 meters) above the ground. ON 2 meters OFF Auto Hold Aircraft 2. Launch the DJI GO 4 app and tap , then tap , read and understand the prompts. *O 'MJHIU (14 P-GPS 12 61% 09:29 AE D 30M H 10.0M H.S 10.0 M/S VS 2.0M/S VPS 2.0M 3.
Phantom 4 Pro / Pro+ User Manual %0 /05 TFMFDU BO BSFB DPOUBJOJOH QFPQMF BOJNBMT TNBMM mOF PCKFDUT F H USFF CSBODIFT and power lines) or transparent objects (e.g. glass or water surface). 4UBZ DMFBS PG PCTUBDMFT OFBS UIF nJHIU QBUI QBSUJDVMBSMZ XIFO UIF BJSDSBGU JT nZJOH CBDLXBSE Be extra vigilant when using ActiveTrack in any of the following situations: a) The tracked subject is not moving on a level plane. b) The tracked subject changes shape drastically while moving.
Phantom 4 Pro / Pro+ User Manual Exiting ActiveTrack Use the following methods to exit ActiveTrack: 1. Tap the “STOP” button on the screen. 2. Press the Intelligent Flight Pause button on the remote controller. STOP OR After exiting ActiveTrack, the aircraft will hover in place, at which point you may choose to fly manually, track another subject, or return to home.
Phantom 4 Pro / Pro+ User Manual *O 'MJHIUἷ(14Ἰ P-GPS 12 61% 09:29 +LGH AE +HDGLQJ N )RUZDUG 63((' P V (0 $GYDQFHG 6HWWLQJ D 30M H 10.0M H.S 10.0 M/S VS 2.0M/S VPS 2.0M "GUFS DPOmSNJOH UIF nJHIU QBUI UIF BJSDSBGU XJMM nZ BMPOH UIF QBUI PO TDSFFO /PUF $POUSPM TUJDLT DBO CF VTFE UP DPOUSPM BJSDSBGU NPWFNFOU EVSJOH UIF nJHIU *O 'MJHIU GPS P-GPS 12 09:29 61% AE N STOP D 30M H 10.0M H.S 10.0 M/S VS 2.0M/S VPS 2.
Phantom 4 Pro / Pro+ User Manual Gesture Mode In Gesture Mode, the Phantom 4 Pro / Pro+’s Vision System recognizes gestures, allowing it to follow and DBQUVSF TFMmFT XJUIPVU B QIPOF PS B DPOUSPMMFS 'PMMPX UIF TUFQT CFMPX UP VTF (FTUVSF .PEF Modes Prompts 1. $POmSN UIF subject Front LEDs Slow Red Flashing Remarks Ensure the forward vision system is active and there is enough light. Tap the icon and move in front of the camera for the Phantom 4 Pro / Pro+ to recognize you.
Phantom 4 Pro / Pro+ User Manual It is important that you only fly in conditions where the Vision Position System can function correctly; otherwise the Terrain Follow Mode will not work. Vision System and Infrared Sensing System [1] [5] [2] [3] [4] Detection Range The detection range of the Vision System and Infrared Sensing System are depicted as follow. Note that the aircraft cannot sense and avoid the obstacles that are not within the detection range.
Phantom 4 Pro / Pro+ User Manual Calibrating Sensors Vision Systems cameras installed on the aircraft are calibrated on delivery. However these cameras are vulnerable to excessive impact and will require occasional calibration via DJI ASSISTANTTM 2 or the DJI GO 4 app. Follow the steps below to calibrate the camera.
Phantom 4 Pro / Pro+ User Manual Assisted Braking from Obstacle Sensing Powered by the Obstacle Sensing, the aircraft will now be able to actively brake when obstacles are detected around the aircraft. Note that Obstacle Sensing function works best when lighting JT BEFRVBUF BOE UIF PCTUBDMF JT DMFBSMZ NBSLFE PS UFYUVSFE 5IF BJSDSBGU NVTU nZ BU OP NPSF UIBO NQI LQI UP BMMPX TVGmDJFOU CSBLJOH EJTUBODF Aircraft The 3D Infrared Sensing System is only active in Beginner mode and Tripod Mode.
Phantom 4 Pro / Pro+ User Manual Flight Recorder Flight data is automatically recorded to the internal storage of the aircraft. This includes flight telemetry, aircraft status information, and other parameters. To access this data, connect the aircraft to the PC through the Micro USB port and launch the DJI Assistant 2. Attaching and Detaching the Propellers Use only DJI approved propellers with your Phantom 4 Pro / Pro+.
Phantom 4 Pro / Pro+ User Manual Be aware of the sharp edges of the propellers. Handle with care. Use only the DJI approved propellers. Do not mix propeller types. $IFDL UIBU UIF QSPQFMMFST BOE NPUPST BSF JOTUBMMFE DPSSFDUMZ BOE mSNMZ CFGPSF FWFSZ nJHIU &OTVSF UIBU BMM QSPQFMMFST BSF JO HPPE DPOEJUJPO CFGPSF FBDI nJHIU %0 /05 VTF BHFE DIJQQFE or broken propellers. To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when they are spinning.
Phantom 4 Pro / Pro+ User Manual Refer to Phantom 4 Pro / Pro+ Intelligent Flight Battery Safety Guidelines before use. Users take full responsibility for all operations and usage. Using the Battery LED1 LED2 LED3 Aircraft LED4 Power Button (Built-in LED) Battery Level Indicators Turning ON/OFF Turning On: Press the Power Button once, then press again and hold for 2 seconds to turn on. The Power LED will turn green and the Battery Level Indicators will display the current battery level.
Phantom 4 Pro / Pro+ User Manual Low Temperature Notice: In cold environments, insert the battery into the battery compartment and turn on the aircraft for approximately 1-2 minutes to warm up before taking off. Charging the Intelligent Flight Battery 1. Connect the Battery Charger to a power source (100-240 V 50/60 Hz). 2. Connect the Intelligent Flight Battery to the Battery Charger to start charging. If the battery level is above 95%, turn on the battery before charging. 3.
Phantom 4 Pro / Pro+ User Manual Battery Protection LED Display The table below shows battery protection mechanisms and corresponding LED patterns.
Remote Controller This section describes the features of the remote controller and includes instructions for controlling the aircraft and the camera. © 2017 DJI All Rights Reserved.
Remote Controller 5HPRWH &RQWUROOHU 3URÀOH The Phantom 4 Pro / Pro+ remote controller is a multi-function wireless communication device that integrates a dual frequency video downlink system and the aircraft remote control system. The 5.8 GHz video downlink is recommended for urban areas to resist interference, 2.4 GHz is good for long transmission distances in open areas. The remote controller features a number of camera control functions, including photo/video capture as well as gimbal control.
Phantom 4 Pro / Pro+ User Manual Power Outlet Charger Controlling the Camera [4] [3] [1] [2] [1] Camera Settings Dial Turn the dial to adjust camera settings such as ISO, shutter speed, and aperture without letting go of the remote controller. Press down on the dial to toggle between these settings. [2] Shutter Button Press to take a photo. If burst mode is activated, multiple photos will be taken with a single press.
Phantom 4 Pro / Pro+ User Manual Controlling the Aircraft This section explains how to control the orientation of the aircraft through the remote controller. Control can be set to Mode 1 , Mode 2 or Mode 3, or to a custom mode.
Phantom 4 Pro / Pro+ User Manual Remote Controller (Mode 2) ( Aircraft Indicates Nose Direction) Remarks Moving the left stick up and down changes the aircraft’s elevation. Push the stick up to ascend and down to descend. When both sticks are centered, the Phantom 4 Pro / Pro+ will hover in place. The more the stick is pushed away from the center position, the faster the Phantom 4 Pro / Pro+ will change elevation. Always push the stick gently to prevent sudden and unexpected elevation changes.
Phantom 4 Pro / Pro+ User Manual Adjusting Controller Sticks Hold and twist the controller sticks clockwise or counter clockwise to adjust the length of the controller sticks. A proper length of controller sticks can improve the controlling accuracy. Flight Mode Switch Toggle the switch to select the desired flight mode. Choose between; P-mode, S-mode and A- mode.
Phantom 4 Pro / Pro+ User Manual Connecting Your Mobile Device Tilt the mobile device holder to the desired position. Press the button on the side of the mobile device holder to release the clamp, and then place your mobile device into the cradle. Adjust the clamp down to secure the mobile device. To connect your mobile device to the remote controller using a USB cable, plug one end of the cable into your mobile device and the other end into the USB port on the back of the remote controller.
Phantom 4 Pro / Pro+ User Manual Status LED Alarm Remote Controller Status — Solid Red Chime The remote controller is disconnected from the aircraft. — Solid Green Chime The remote controller is connected to the aircraft. Slow Blinking Red D-D-D...... Remote controller error. / Red and Green/ Red and Yellow Alternate Blinks None HD downlink is disrupted. RTH LED Sound Remote Controller Status — Solid White Chime Aircraft is returning home. Remote Controller Blinking White D...
Phantom 4 Pro / Pro+ User Manual 4. The remote controller is ready to link. The Remote Controller Status Indicator blinks blue and a beep is emitted. RC Control Setting RC Calibration Stick Mode Searching for aircraft frequency, Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled. timeout in 54 seconds Do not change unless familiar with your new mode.
Camera and Gimbal This section provides the technical TQFDJmDBUJPOT PG UIF DBNFSB BOE explains the gimbal’s operation modes. 44 © 2017 DJI All Rights Reserved.
Camera and Gimbal Camera 3URÀOH The Phantom 4 Pro / Pro+ camera uses 1-inch CMOS sensor to capture video (up to 4096×2160p at 60fps) and 20 megapixel stills. Videos can be stored in either MOV or MP4 formats. Available picture shooting modes include burst, continuous, and time-lapse mode. A live preview of what the camera sees can be monitored on the connected mobile device via the DJI GO 4 app. The Phantom 4 Pro / Pro+ supports the capture of 4K at 60fps. Both H.265 and H.
Phantom 4 Pro / Pro+ User Manual 5IF BJSDSBGU NVTU CF UVSOFE PO CFGPSF BUUFNQUJOH UP BDDFTT UIF mMFT PO UIF .JDSP 4% DBSE Gimbal Camera Camera Operation Use the Shutter and Record buttons on the remote controller to shoot the photos or videos through the DJI GO 4 app. Camera Status LED Indicator Descriptions 5IF $BNFSB -&% *OEJDBUPS MJHIUT VQ BGUFS UIF nJHIU CBUUFSZ JT QPXFSFE PO *U QSPWJEFT JOGPSNBUJPO PO UIF working status of the camera.
Phantom 4 Pro / Pro+ User Manual Gimbal 3URÀOH The 3-axis gimbal provides a steady platform for the attached camera, allowing you to capture clear, TUBCMF JNBHFT BOE WJEFP 5IF HJNCBM DBO UJMU UIF DBNFSB XJUIJO B SBOHF 30° 0° Gimbal Camera -90° Use the gimbal dial on the remote controller to control the tilt movement of the camera. Gimbal Operation Modes Two gimbal operation modes are available. Switch between the different operation modes on the camera settings page of the DJI GO 4 app.
DJI GO 4 App This section introduces the four main functions of the DJI GO 4 app. 48 © 2017 DJI All Rights Reserved.
DJI GO 4 App 5IF %+* (0 BQQ JT B NPCJMF BQQMJDBUJPO EFTJHOFE TQFDJmDBMMZ GPS %+* FRVJQNFOU 6TF UIJT BQQ UP DPOUSPM the gimbal, camera, and other aircraft functions. The app features Equipment, Editor, SkyPixel and Me TFDUJPOT XIJDI BSF VTFE GPS DPOmHVSJOH ZPVS BJSDSBGU FEJUJOH BOE TIBSJOH ZPVS QIPUPT BOE WJEFPT XJUI others. It is recommended that you use a tablet for the best experience.
Phantom 4 Pro / Pro+ User Manual 1. System Status 5IJT JDPO JOEJDBUFT BJSDSBGU nJHIU TUBUVT BOE WBSJPVT XBSOJOH NFTTBHFT READY TO GO (GPS) 2. Obstacles Detection Status : Red bars are displayed when obstacles are close to the aircraft. Orange bars are displayed when obstacles are in detection range. 3. Battery Level Indicator : The battery level indicator provides a dynamic display of the battery level.
Phantom 4 Pro / Pro+ User Manual 13. Auto Exposure Lock AE : Tap to lock the exposure value. 14. Photo/Video Button : Tap to switch between photo and video recording modes. 15. Gimbal Slider : Displays the pitch of the gimbal. 16. Shoot / Record Button / : Tap to start shooting photos or recording video. 17. Camera Settings : Tap to set ISO, shutter and auto exposure values of the camera. 19. Map Tap the Mini Map to switch between Camera View and Map View. 20. Flight Telemetry D 30M H 10.0M H.S 10.
Phantom 4 Pro / Pro+ User Manual 21. Intelligent Flight Mode : Display the current mode. Tap to select Intelligent Flight Mode. 22. Smart RTH : Initiate RTH home procedure. Tap to have the aircraft return to the last recorded home point. 23. Auto Takeoff/Landing / : Tap to initiate auto takeoff or landing. 24. Livestream : This icon indicates the current video feed is being broadcast live on YouTube. Ensure that mobile data service is available on your mobile device. 25.
Flight 5IJT TFDUJPO EFTDSJCFT TBGF nJHIU QSBDUJDFT BOE nJHIU SFTUSJDUJPOT © 2017 DJI All Rights Reserved.
Flight 0ODF QSF nJHIU QSFQBSBUJPO JT DPNQMFUF JU JT SFDPNNFOEFE UIBU ZPV VTF UIF nJHIU TJNVMBUPS JO UIF %+* (0 BQQ UP IPOF ZPVS nJHIU TLJMMT BOE QSBDUJDF nZJOH TBGFMZ &OTVSF UIBU BMM nJHIUT BSF DBSSJFE PVU JO BO PQFO area. Flight Environment Requirements Flight 1. Do not use the aircraft in severe weather conditions. These include wind speeds exceeding 10 m/s , snow, rain and fog.
Phantom 4 Pro / Pro+ User Manual GPS Signal Strong Blinking Green Flight Limits DJI GO 4 App Aircraft Status Indicator Maximum Flight Altitude Aircraft's altitude cannot FYDFFE UIF TQFDJmFE WBMVF Warning: Height limit reached. None. Max Radius Flight distance must be within the max radius. Warning: Distance limit reached. 3BQJE SFE nBTIJOH when close to the max radius limit.
Phantom 4 Pro / Pro+ User Manual GFFU GFFU NJMF GFFU 3 3 Restricted Area Flight 3FTUSJDUFE "SFBT EPFT OPU IBWF nJHIU BMUJUVEF SFTUSJDUJPOT (2) R miles around the designated restriction area is a Take-off Restricted area. Aircraft cannot take off XJUIJO UIJT [POF 5IF WBMVF PG 3 WBSJFT CBTFE PO UIF EFmOJUJPO PG UIF SFTUSJDUFE BSFBT (3) A “warning zone” has been set around the Restricted Area. When the aircraft approaches within 0.
Phantom 4 Pro / Pro+ User Manual 3UHÁLJKW &KHFNOLVW 1. Remote controller, Intelligent Flight Battery, and mobile device are fully charged. 1SPQFMMFST BSF NPVOUFE DPSSFDUMZ BOE mSNMZ 3. Micro SD card has been inserted, if necessary. 4. Gimbal is functioning normally. 5. Motors can start and are functioning normally. 6. The DJI GO 4 app is successfully connected to the aircraft. 7. Ensure that the sensors for the Obstacle Sensing System are clean.
Phantom 4 Pro / Pro+ User Manual 3. Hold the aircraft vertically, with nose pointing downward, and rotate it 360 degrees around the center axis. Flight 4. Re-calibrate the aircraft if the aircraft status indicators glows blinking red. If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your aircraft to a different location and try again. DO NOT calibrate the compass near metal objects such as a metal bridge, cars, scaffolding.
Phantom 4 Pro / Pro+ User Manual 2. Abort landing process immediately by using the button on the screen. 3. a. When Landing Protection determines that the ground is suitable for landing, the Phantom 4 Pro / Pro+ will land gently. b. If Landing Protection determines that the ground is not suitable for landing, the Phantom 4 Pro / 1SP XJMM IPWFS BOE XBJU GPS QJMPU DPOmSNBUJPO c.
Phantom 4 Pro / Pro+ User Manual 6WRS WKH 0RWRU 0LG ÁLJKW Pull the left stick to the bottom inside corners and press the RTH button at the same time. Only stop the PRWRUV PLG ñLJKW LQ HPHUJHQF\ VLWXDWLRQV ZKHQ GRLQJ VR FDQ UHGXFH WKH ULVN RI GDPDJH RU LQMXU\ Flight Flight Test Takeoff/Landing Procedures 1MBDF UIF BJSDSBGU JO BO PQFO nBU BSFB XJUI UIF CBUUFSZ MFWFM JOEJDBUPST GBDJOH UPXBSET ZPV 2. Turn on the remote controller and your mobile device, then turn on the Intelligent Flight Battery. 3.
Appendix © 2017 DJI All Rights Reserved.
Appendix 6SHFLÀFDWLRQV Aircraft Weight (Battery & Propellers Included) 1388 g Diagonal Size (Excluding Propellers) 350 mm Max Ascent Speed Sport mode: 19.7ft/s(6 m/s); GPS mode: 16.4ft/s(5 m/s) Max Descent Speed Sport mode: 13.1ft/s(4 m/s); GPS mode: 9.
Phantom 4 Pro / Pro+ User Manual Camera 1’’ CMOS; Effective pixels: 20 M Lens FOV (Field of View) 84°, 8.
Phantom 4 Pro / Pro+ User Manual Remote Controller Operating Frequency 2.400 - 2.483 GHz and 5.725 - 5.825 GHz Operating Temperature 2.400 - 2.483 GHz (Unobstructed, free of interference) FCC: 4.3 mi (7 km); CE: 2.2 mi (3.5 km); SRRC: 2.5 mi (4 km) 5.725 - 5.825 GHz (Unobstructed, free of interference) FCC: 4.3 mi (7 km); CE: 1.2 mi (2 km); SRRC: 3.
Phantom 4 Pro / Pro+ User Manual For Phantom 4 Pro+, connect the Micro USB port of the aircraft and the remote controller with the USB OTG cable. 3. Follow the on-screen instructions in the DJI GO 4 app to upgrade. Ensure the Internet is available during upgrading. 3FTUBSU UIF BJSDSBGU BGUFS UIF mSNXBSF VQHSBEF JT DPNQMFUF Upgrading the Remote Controller Firmware Method 1: Using the DJI GO 4 App Power on the remote controller and connect it with the DJI GO 4 app.
Phantom 4 Pro / Pro+ User Manual After-Sales Information Visit the following pages to learn more about After-sales policy and warranty information: 1. After-sales Policy: http://www.dji.com/service 2. Refund Policy: http://www.dji.com/service/refund-return 3. Paid Repair Service: http://www.dji.com/service/repair-service 4. Warranty Service: http://www.dji.com/service/warranty-service Appendix DJI incorporates HDMITM technology. 5IF UFSNT )%.* BOE )%.* )JHI %FmOJUJPO .VMUJNFEJB *OUFSGBDF BOE UIF )%.
DJI Support http://www.dji.com/support This content is subject to change. Download the latest version from KWWS ZZZ GML FRP SURGXFW SKDQWRP SUR If you have any questions about this document, please contact DJI by sending a message to 'RF6XSSRUW#GML FRP. PHANTOM is a trademark of DJI. Copyright © 2017 DJI All Rights Reserved.
