Safety data sheet

Amperex Technology Limited
新能源科技有限公司
3503,Wharf Cable TV Tower, 9 Hoi Shing Road,Tsuen Wan,N.T, HongKong China
香港新界荃湾海盛路 9 号有限电视大楼 35 楼 3 号单元
Tel：[phone] Fax：[phone] http://www.ATLbattery.com
MATERIAL SAFETY DATA SHEET
Issue: 2016-A Doc No.: 2016-A-084
------------------------------------------------------------------------------------------------------------------
Page 8 of 19
can not transport, should redesign. If the battery through the test, for the lithium battery only,
follow the UN3480 and the packing requirements for PI965, for the lithium battery which
installed in equipment, follow the UN3481 and the packing requirements for PI967.
The lithium battery testing meets all requirements under UN Manual of Tests and Criteria
Part III, subsection 38.3.
No
ITEMS
RESULT
REMARKS
1
Altitude simulation
Pass
Test 1 to 5 must be conducted in
sequence on the same cell or battery
2
Thermal test
Pass
3
Vibration
Pass
4
Shock
Pass
5
External short circuit
Pass
6
Impact
Pass
7
Forced Discharge
Pass
Only for Cell
14.2 The requirement of ocean shipping
According to International Maritime Dangerous Goods Code(IMDG 37
th
) to transport and
according to the requirements of UN NO. 3480/3481 to management the goods,and require
class II packaging. Firmly installation. mutual isolation. avoid short circuits. If the package
contain more than 24 lithium batteries or more than 12 lithium battery packs, must provide the
special program if package damage.
The clause 188 of IMDG require the Watt of lithium ion batteries no more than 100 WH,
and must marked the WHR ratio label. Otherwise, the battery and module should packed in a
strong outer packaging or be contained in equipment.
The clause 230 of IMDG 37
th
require the lithium battery testing should meets all
requirements under UN Manual of Tests and Criteria Part III, subsection 38.3.
For more information, Call: [phone].
15. Regulatory Information
See ACGIH exposure limits information as noted in Section3
US: This MSDS meets/exceeds OSHA requirements.
International: This MSDS conforms to European Union (UN), the International Standards
Organization (ISO) and the International Labor Organization (ILO) and as documental in
ANSI (American National Standards Institute) Standard Z400.1-1993.
Air transportation: Class 9 dangerous goods, require class II packaging. According to Civil
aviation industry standard MH/T1020-2009 Lithium Battery Air Transport Standard and