User Manual

©
2018 DJI All Rights Reserved.
25
Mavic Air User Manual
Tripod Mode
Tap in the DJI GO 4 app to select Tripod mode. In Tripod mode, the maximum flight speed is limited
to 2.2 mph (3.6 kph). Responsiveness to stick movements is also reduced for smoother, more controlled
movements.
Only use Tripod mode where the GPS signal is strong or light conditions are ideal for the Vision
Systems. If the GPS signal is lost and if the Vision Systems are disabled or unavailable, the
aircraft will automatically switch to ATTI mode. In this case, ight speed will increase and the
aircraft will not hover in place. Use Tripod mode carefully.
Exercise caution once you have landed the aircraft using GestureLand, as the aircraft will
continue to respond to hand gestures until you exit SmartCapture. If the aircraft detects
the GestureLaunch gesture before you have exited SmartCapture, the aircraft will take off.
Exercise caution when approaching the aircraft and ensure you do not accidently make
the GestureLaunch gesture.
When using SmartCapture without the remote controller or the DJI GO 4 app:
a. If no face or palm is detected in the first 60 seconds after takeoff, the aircraft lands
automatically;
b. If the subject is lost during Follow the aircraft ies back to the position the subject was
most recently detected at and waits. If the aircraft detects the subject within 30 seconds
it continues following it. If the subject is not detected within 30 seconds the aircraft lands
automatically.
Only use the group sele feature in open areas with no obstacles, a strong GPS signal, and
sucient light.
The group sele feature is disabled if there is no GPS signal.
Cinematic Mode
Tap in the DJI GO 4 app to select Cinematic mode. In Cinematic mode, the aircraft’s braking distance
is extended and its rotation speed is reduced. The aircraft will slow down gently until it stops, keeping
footage smooth and stable even if control inputs are choppy.
TapFly
TapFly features four sub-modes, Forward, Backward, Free, and Coordinate. Provided that lighting conditions
are suitable (between 300 and 10,000 lux), the aircraft will automatically avoid obstacles it senses.
Forward: The aircraft will y towards the target with the Forward Vision System sensing obstacles.
Backward: The aircraft will y in the opposite direction of the target with the Backward Vision System
sensing obstacles..
Free: The aircraft will y towards the target. The remote controller can be used to maneuver the
orientation of the aircraft freely.
Coordinate: Tap a specic location on screen. The aircraft will travel to that point at its current altitude,
then hover in place.
Using TapFly
Ensure that the aircraft is in P-mode and that the Intelligent Flight Battery is suciently charged. Follow
the steps below to use TapFly: