Use and Care Manual

Spark

User Manual

After these issues are resolved, press the Power button to turn off the Battery Level Indicators. Unplug

the Intelligent Flight Battery from the charger and plug it back in to resume charging. You do not need to

unplug and plug in the charger in the event of a room temperature error; the charger will resume charging

when the temperature is within the allowable range.

DJI does not take any responsibility for damage caused by third-party chargers.

Discharging Intelligent Flight Batteries before long trips:

Fly Spark outdoors until there is less than 30% power left or until the battery no longer turns on.

Gimbal and Camera

Gimbal

Prole

Spark’s 2-axis mechanical gimbal provides stabilization for the attached camera, allowing you to capture

clear, stable images and video. The gimbal has an 85˚ tilt range.

In the camera view, press and hold on the screen until a blue circle appears. Dragging the circle

left and right will control the aircraft’s orientation, and dragging the circle up and down will control

the camera’s tilt.

-85°

0°

Hold the rear arms of the aircraft and push the Intelligent Flight Battery in place all the way to the end.

Push and pull the battery to check that it is securely clamped.

Battery Installation

DO NOT touch the battery buckles while holding the aircraft to avoid it dropping off.

Detaching the Battery

Pull the battery buckles and remove the battery from the aircraft.