User Manual

Remote Controller

Mavic Pro

User Manual

Dual Remote Controller Mode

Mavic Pro supports Dual Remote Controller Mode, Mavic Pro rmware version 01.03.0400, DJI GO 4 app

iOS v4.0.5 or DJI GO 4 app Android v4.0.4 are required. Two remote controllers can connect to the same

aircraft in Dual Remote Controller Mode.

Both the Master remote controller and the Slave remote controller are able to control the orientation of the

aircraft and the movement of the gimbal and camera operation after the remote controllers have been

linked to the aircraft.

Please pay attention to the below operation differences of the Master and Slave remote controller.

1. Gimbal Dial

Both Master remote controller and Slave remote controller are able to control the gimbal dial but the

Master remote controller has priority. For example, the Slave remote controller is unable to control the

gimbal dial when the Master remote controller is using the gimbal dial. However, after stopping control

of the gimbal dial for two seconds, the Slave remote controller is able to control the gimbal dial.

2. Control Stick

Both the Master remote controller and Slave remote controller are able to control the orientation of the

aircraft using control sticks. The Master remote controller has priority. The Slave remote controller is

unable to control the aircraft’s orientation when the Master remote controller is operating the control

sticks. When the control sticks are idle for two seconds, the Slave remote controller is able to control

the aircraft’s orientation.

To ensure ight safety, when pulling down the throttle stick on the Slave remote controller, push both

sticks down and inwards. When the Master remote controller is controlling the aircraft, the aircraft will

not respond to that command, even if the Master remote controller has been idle for more than two

seconds.

The Slave remote controller sticks need to be released so that the Slave remote controller is able to

control the aircraft.

3. Flight Mode Switch

Only use the Master remote controller to switch the ight mode. The Flight Mode Switch is disabled on

the Slave remote controller.

4. DJI GO 4 App Settings

The display and parameter settings for the Master and Slave remote controllers in DJI GO 4 are

the same. Everything except the ght controller, vision system, video transmission, Intelligent Flight

Battery and gimbal parameters cannot be set up when using the Slave remote controller. Display and

parameter settings in the DJI GO 4 for Master and Slave remote controllers are the same.