User Manual 2016.11 V1.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this manual 2 Legends 2 Read Before the First Flight 2 Watch the Tutorial Videos 2 Download the DJI GO 4 App 2 Download the DJI Assistant 2 2 Product Profile 6 Introduction 6 Features Highlights 6 Installing the Aircraft 6 Aircraft Diagram 8 Remote Controller Diagram 8 Aircraft 13 Flight Controller 13 Flight Mode 13 Flight Status Indicator 14 Return-to-Home (RTH) 15 TapFly 19 ActiveTrack 21 Draw 24 Gesture Mode 26 Tripod Mode 26 Terrain Follow Mode
Camera and Gimbal 44 Gimbal 46 DJI GO 4 App 48 Equipment 48 Editor 51 SkyPixel 51 Me 51 Flight 53 Flight Environment Requirements 53 Flight Limits and No-Fly Zones 53 Preflight Checklist 56 Calibrating the Compass 57 Auto Takeoff and Auto Landing 58 Starting/Stopping the Motors 59 Stop the Motor Mid-flight 59 Flight Test 60 Appendix 4 44 Camera 62 Specifications 62 Upgrading the Firmware 64 Intelligent Flight Mode 65 After-Sales Information 66 Compliance Informat
Product Profile This section introduces the Phantom 4 Pro / Pro+ and lists the components of the aircraft and remote controller. © 2016 DJI All Rights Reserved.
Product Profile Introduction The DJI Phantom 4 Pro / Pro+ is an extremely smart flying camera with five-directions of obstacle sensing made up of vision and infrared sensors, making it able to intelligently avoid obstacles during flight. Its brand new camera offers unprecedentedly image quality for the Phantom, with greater clarity, lower noise, higher resolution photos and videos. Dual frequency support in the remote controller makes the HD video downlink more efficient and more stable.
Phantom 4 Pro / Pro+ User Manual 2. Attaching the Propellers Mount the propellers with black propeller rings to the motors with black dots. Mount the propellers with sliver propeller rings to the motors without black dots. Press the propeller down onto the mounting plate and rotate in the lock direction until it is secured. Product Profile 3. Battery Installation Slide battery into the battery compartment according to the arrow’s direction as shown below.
Phantom 4 Pro / Pro+ User Manual Aircraft Diagram [1] [2] [3] [4] [6] [1] GPS [2] Propellers [3] Motors [4] Front LEDs [5] [5] Gimbal and Camera Product Profile [7] [8] [9] [6] Forward Vision System [7] Intelligent Flight Battery [8] Aircraft Status Indicator [9] Rear Vision System [10] Infrared Sensing System [10] [11] [13] [12] [11] Camera / Linking Status Indicator and Link Button [12] Micro USB Port [13] Camera Micro SD Card Slot [14] Downward Vision System [14] Remote Controller Diagram
Phantom 4 Pro / Pro+ User Manual [5] Battery Level LEDs [8] RTH LED [6] Status LED [9] Speaker Displays the battery level of the Remote Controller. Circular LED around the RTH button displays RTH status. Displays the Remote Controller's system status. Audio output. [7] Power Button Used to turn the Remote Controller on and off. [20] [19] [12] Shutter Button [21] Product Profile [18] Two-stage button, press to take a photo.
Phantom 4 Pro / Pro+ User Manual Phantom 4 Pro (Model: GL300F) [3] Control Stick Controls the orientation and movement of the aircraft. [1] [2] [4] Return Home (RTH) Button Product Profile Press and hold the button to initiate Return to Home (RTH). [3] [8] [4] [7] [5] [6] [5] Battery Level LEDs Displays the battery level of the remote controller. [6] Status LED Displays the remote controller's system status.
Phantom 4 Pro / Pro+ User Manual [17] C1 Button Customizable through the DJI GO 4 app. [18] C2 Button [18] [17] Customizable through the DJI GO 4 app. [19] Power Port Connect to the Charger to charge the battery of the remote controller. [19] Product Profile © 2016 DJI All Rights Reserved.
Aircraft This section introduces the Flight Controller, Vision System, and the Intelligent Flight Battery. 12 © 2016 DJI All Rights Reserved.
Aircraft Flight Controller The Phantom 4 Pro / Pro+ flight controller features several important upgrades. Safety modes include Failsafe and Return-to-Home. These features ensure the safe return of your aircraft if the control signal is lost. The flight controller can also save critical flight data from each flight to the on-board storage device. The new flight controller also provides increased stability and a new air braking feature.
Phantom 4 Pro / Pro+ User Manual Flight Status Indicator The Phantom 4 Pro / Pro+ has Front LEDs and Aircraft Status Indicators. The positions of these LEDs are shown in the figure below: Aircraft Status Indicator Front LED Aircraft The Front LEDs show the orientation of the aircraft. The Front LEDs glow solid red when the aircraft is turned on to indicate the front (or nose) of the aircraft. The Aircraft Status Indicators communicate the system status of the flight controller.
Phantom 4 Pro / Pro+ User Manual Return-to-Home (RTH) Return-to-Home (RTH) function brings the aircraft back to the last recorded Home Point. There are three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes these three scenarios in detail. Description GPS Home Point If a strong GPS signal was acquired before takeoff, the Home Point is the location from which the aircraft launched. The GPS signal strength is indicated by the GPS icon ( ).
Phantom 4 Pro / Pro+ User Manual Smart RTH Use the RTH button on the remote controller or tap the RTH button in the DJI GO 4 app and follow the onscreen instructions when GPS is available to initiate Smart RTH. The aircraft will then automatically return to the last recorded Home Point. Use the remote controller to control the aircraft’s speed or altitude to avoid a collision during the Smart RTH process.
Phantom 4 Pro / Pro+ User Manual Battery Level Warning Remark Aircraft Status Indicator DJI GO 4 App Flight Instructions Tap “Go-home” to have the aircraft return to the Home point and land automatically, or “Cancel” to resume normal flight. If no action is taken, the aircraft will automatically go home and land after 10 seconds. Remote controller will sound an alarm. Fly the aircraft back and land it as soon as possible, then stop the motors and replace the battery. Battery power is low.
Phantom 4 Pro / Pro+ User Manual Failsafe Safety Notices The aircraft cannot avoid obstruction during the Failsafe RTH when the Forward Vision System is disabled. Therefore, it is important to set a suitable Failsafe altitude before each flight. Launch the DJI GO 4 app, enter “Camera” and tap to set the Failsafe Altitude.
Phantom 4 Pro / Pro+ User Manual The Obstacle Sensing function is disabled during RTH descent. Proceed with care. To ensure the aircraft returns home forwards, it cannot rotate during RTH while the Forward Vision System is enabled. The aircraft cannot avoid obstacles above, beside, or behind the aircraft. TapFly Introduction without using the remote controller.
Phantom 4 Pro / Pro+ User Manual 3. Tap once on the target direction and wait for icon to appear. Tap again to confirm the selection and the aircraft will automatically fly towards the target direction. In Flight (GPS) 09:29 P-GPS 12 61% AE Aircraft D 30M H 10.0M H.S 10.0 M/S VS 2.0M/S VPS 2.0M DO NOT guide the aircraft to fly towards people, animals, small and fine objects (e.g. tree branches and power lines) or transparent objects (e.g. glass or water).
Phantom 4 Pro / Pro+ User Manual TapFly includes following functions: TapFly Forward Mode Free Mode The aircraft will fly in the opposite direction of the target. Rear Vision System is active. Aircraft The aircraft will fly towards the target. Forward Vision System is active. TapFly Backward Mode The aircraft will fly towards the target. The remote controller can be used to maneuver the yaw of the aircraft freely. Obstacle Sensing is disabled in this mode, use it in an unobstructed environment.
Phantom 4 Pro / Pro+ User Manual Using ActiveTrack Ensure the Intelligent Flight Battery has more than 50% power and the aircraft is in P-mode. Then follow the steps below to use ActiveTrack: 1. Take off and hover at least 6 feet (2 meters) above the ground. ON 2 meters OFF Auto Hold Aircraft 2. Launch the DJI GO 4 app and tap , then tap , read and understand the prompts. In Flight (GPS) 09:29 P-GPS 12 61% AE D 30M H 10.0M H.S 10.0 M/S VS 2.0M/S VPS 2.0M 3.
Phantom 4 Pro / Pro+ User Manual DO NOT select an area containing people, animals, small, fine objects (e.g. tree branches and power lines) or transparent objects (e.g. glass or water surface). Stay clear of obstacles near the flight path, particularly when the aircraft is flying backward. Be extra vigilant when using ActiveTrack in any of the following situations: a) The tracked subject is not moving on a level plane. b) The tracked subject changes shape drastically while moving.
Phantom 4 Pro / Pro+ User Manual Exiting ActiveTrack Use the following methods to exit ActiveTrack: 1. Tap the “STOP” button on the screen. 2. Press the Intelligent Flight Pause button on the remote controller. STOP OR After exiting ActiveTrack, the aircraft will hover in place, at which point you may choose to fly manually, track another subject, or return to home. Aircraft Draw Introduction Using Draw, the aircraft will fly along the flight path drawn on-screen.
Phantom 4 Pro / Pro+ User Manual In Flight（GPS） 09:29 P-GPS 12 61% Hide AE Heading 268m Forward SPEED 11.1 m/s GO Advanced Setting D 30M H 10.0M H.S 10.0 M/S VS 2.0M/S VPS 2.0M After confirming the flight path, the aircraft will fly along the path on-screen. Note: Control sticks can be used to control aircraft movement during the flight. In Flight GPS 09:29 P-GPS 12 61% AE 268m STOP D 30M H 10.0M H.S 10.0 M/S VS 2.0M/S VPS 2.
Phantom 4 Pro / Pro+ User Manual Gesture Mode In Gesture Mode, the Phantom 4 Pro / Pro+’s Vision System recognizes gestures, allowing it to follow and capture selfies without a phone or a controller. Follow the steps below to use Gesture Mode: Modes Prompts 1. Confirm the subject Aircraft 2. Confirm the distance 3. Selfie Count Down Front LEDs Slow Red Flashing Remarks Ensure the forward vision system is active and there is enough light.
Phantom 4 Pro / Pro+ User Manual It is important that you only fly in conditions where the Vision Position System can function correctly; otherwise the Terrain Follow Mode will not work. Vision System and Infrared Sensing System [1] [5] [2] [3] [4] Detection Range The detection range of the Vision System and Infrared Sensing System are depicted as follow. Note that the aircraft cannot sense and avoid the obstacles that are not within the detection range.
Phantom 4 Pro / Pro+ User Manual Calibrating Sensors Forward and Downward Vision Systems cameras installed on the aircraft are calibrated on delivery. However these cameras are vulnerable to excessive impact and will require occasional calibration via DJI Assistant 2 or the DJI GO 4 app. Follow the steps below to calibrate the camera.
Phantom 4 Pro / Pro+ User Manual Assisted Braking from Obstacle Sensing Powered by the Obstacle Sensing, the aircraft will now be able to actively brake when obstacles are detected around the aircraft. Note that Obstacle Sensing function works best when lighting is adequate and the obstacle is clearly marked or textured. The aircraft must fly at no more than 31mph (50kph) to allow sufficient braking distance. Aircraft The 3D Infrared Sensing System is only active in Beginner mode and Tripod Mode.
Phantom 4 Pro / Pro+ User Manual Flight Recorder Flight data is automatically recorded to the internal storage of the aircraft. This includes flight telemetry, aircraft status information, and other parameters. To access this data, connect the aircraft to the PC through the Micro USB port and launch the DJI Assistant 2. Attaching and Detaching the Propellers Use only DJI approved propellers with your Phantom 4 Pro / Pro+.
Phantom 4 Pro / Pro+ User Manual DJI Intelligent Flight Battery The DJI Intelligent Flight Battery has a capacity of 5870 mAh, a voltage of 15.2 V, and a smart charge/ discharge functionality. It should only be charged using an appropriate DJI approved charger. Aircraft Intelligent Flight Battery Charger The Intelligent Flight Battery must be fully charged before using it for the first time. Be aware that the output power of the supplied Phantom 4 Pro / Pro+ charger is 100W.
Phantom 4 Pro / Pro+ User Manual Using the Battery LED1 LED2 LED3 LED4 Power Button (Built-in LED) Battery Level Indicators Aircraft Turning ON/OFF Turning On: Press the Power Button once, then press again and hold for 2 seconds to turn on. The Power LED will turn green and the Battery Level Indicators will display the current battery level. Turning Off: Press the Power Button once, then press again and hold for 2 seconds to turn off.
Phantom 4 Pro / Pro+ User Manual Low Temperature Notice: In cold environments, insert the battery into the battery compartment and turn on the aircraft for approximately 1-2 minutes to warm up before taking off. Charging the Intelligent Flight Battery 1. Connect the Battery Charger to a power source (100-240 V 50/60 Hz). 2. Connect one end of the charger to the Intelligent Flight Battery to the Battery Charger. If the battery level is above 95%, turn on the battery before charging. 3.
Phantom 4 Pro / Pro+ User Manual Battery Protection LED Display The table below shows battery protection mechanisms and corresponding LED patterns.
Remote Controller This section describes the features of the remote controller and includes instructions for controlling the aircraft and the camera. © 2016 DJI All Rights Reserved.
Remote Controller Remote Controller Profile The Phantom 4 Pro / Pro+ remote controller is a multi-function wireless communication device that integrates a dual frequency video downlink system and the aircraft remote control system. The 5.8 GHz video downlink is recommended for urban areas to resist interference, 2.4 GHz is good for long transmission distances in open areas.
Phantom 4 Pro / Pro+ User Manual Power Outlet Charger Controlling the Camera [4] [3] [1] [2] [1] Camera Settings Dial Turn the dial to adjust camera settings such as ISO, shutter speed, and aperture without letting go of the remote controller. Press down on the dial to toggle between these settings. [2] Shutter Button Press to take a photo. If burst mode is activated, multiple photos will be taken with a single press.
Phantom 4 Pro / Pro+ User Manual Remote Controller (Mode 2) ( Aircraft Indicates Nose Direction) Remarks Moving the left stick up and down changes the aircraft’s elevation. Push the stick up to ascend and down to descend. When both sticks are centered, the Phantom 4 Pro / Pro+ will hover in place. The more the stick is pushed away from the center position, the faster the Phantom 4 Pro / Pro+ will change elevation. Always push the stick gently to prevent sudden and unexpected elevation changes.
Phantom 4 Pro / Pro+ User Manual Adjusting Controller Sticks Hold and twist the controller sticks clockwise or counter clockwise to adjust the length of the controller sticks. A proper length of controller sticks can improve the controlling accuracy. Flight Mode Switch Toggle the switch to select the desired flight mode. Choose between; P-mode, S-mode and A- mode.
Phantom 4 Pro / Pro+ User Manual Connecting Your Mobile Device Tilt the mobile device holder to the desired position. Press the button on the side of the mobile device holder to release the clamp, and then place your mobile device into the cradle. Adjust the clamp down to secure the mobile device. To connect your mobile device to the remote controller using a USB cable, plug one end of the cable into your mobile device and the other end into the USB port on the back of the remote controller.
Phantom 4 Pro / Pro+ User Manual Status LED Alarm Remote Controller Status — Solid Red Chime The remote controller is disconnected from the aircraft. — Solid Green Chime The remote controller is connected to the aircraft. Slow Blinking Red D-D-D...... Remote controller error. / Red and Green/ Red and Yellow Alternate Blinks None HD downlink is disrupted. RTH LED Sound Remote Controller Status — Solid White Chime Aircraft is returning home. Sending Return-to-Home command to the aircraft.
Phantom 4 Pro / Pro+ User Manual 4. The remote controller is ready to link. The Remote Controller Status Indicator blinks blue and a beep is emitted. RC Control Setting RC Calibration Stick Mode Searching for aircraft frequency, Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled. timeout in 54 seconds Do not change unless familiar with your new mode.
Camera and Gimbal This section provides the technical specifications of the camera and explains the gimbal’s operation modes. © 2016 DJI All Rights Reserved.
Camera and Gimbal Camera Profile The Phantom 4 Pro / Pro+ camera uses 1-inch CMOS sensor to capture video (up to 4096×2160p at 60fps) and 20 megapixel stills. Videos can be stored in either MOV or MP4 formats. Available picture shooting modes include burst, continuous, and time-lapse mode. A live preview of what the camera sees can be monitored on the connected mobile device via the DJI GO 4 app. The Phantom 4 Pro / Pro+ supports the capture of 4K at 60fps. Both H.265 and H.
Phantom 4 Pro / Pro+ User Manual The aircraft must be turned on before attempting to access the files on the Micro SD card. Use the Shutter and Record buttons on the remote controller to shoot the photos or videos through the DJI GO 4 app. Camera Status LED Indicator Descriptions The Camera LED Indicator lights up after the flight battery is powered on. It provides information on the working status of the camera.
Phantom 4 Pro / Pro+ User Manual Gimbal Profile The 3-axis gimbal provides a steady platform for the attached camera, allowing you to capture clear, stable images and video. The gimbal can tilt the camera within a 120˚ range. 30° 0° Gimbal Camera -90° Use the gimbal dial on the remote controller to control the tilt movement of the camera. Gimbal Operation Modes Two gimbal operation modes are available. Switch between the different operation modes on the camera settings page of the DJI GO 4 app.
DJI GO 4 App This section introduces the four main functions of the DJI GO 4 app. © 2016 DJI All Rights Reserved.
DJI GO 4 App The DJI GO 4 app is a mobile application designed specifically for DJI equipment. Use this app to control the gimbal, camera, and other aircraft functions. The app features Equipment, Editor, SkyPixel and Me sections, which are used for configuring your aircraft, editing and sharing your photos and videos with others. It is recommended that you use a tablet for the best experience.
Phantom 4 Pro / Pro+ User Manual 1. System Status : This icon indicates aircraft flight status and various warning messages. READY TO GO (GPS) 2. Obstacles Detection Status : Red bars are displayed when obstacles are close to the aircraft. Orange bars are displayed when obstacles are in detection range. 3. Battery Level Indicator : The battery level indicator provides a dynamic display of the battery level.
Phantom 4 Pro / Pro+ User Manual 13. Auto Exposure Lock AE : Tap to lock the exposure value. 14. Photo/Video Button : Tap to switch between photo and video recording modes. 15. Gimbal Slider : Displays the pitch of the gimbal. 16. Shoot / Record Button / : Tap to start shooting photos or recording video. 17. Camera Settings : Tap to set ISO, shutter and auto exposure values of the camera. DJI GO App 18.
Phantom 4 Pro / Pro+ User Manual 21. Intelligent Flight Mode : Display the current mode. Tap to select Intelligent Flight Mode. 22. Smart RTH : Initiate RTH home procedure. Tap to have the aircraft return to the last recorded home point. 23. Auto Takeoff/Landing / : Tap to initiate auto takeoff or landing. 24. Livestream : This icon indicates the current video feed is being broadcast live on YouTube. Ensure that mobile data service is available on your mobile device. 25.
Flight This section describes safe flight practices and flight restrictions. 52 © 2016 DJI All Rights Reserved.
Flight Once pre-flight preparation is complete, it is recommended that you use the flight simulator in the DJI GO 4 app to hone your flight skills and practice flying safely. Ensure that all flights are carried out in an open area. Flight Environment Requirements Flight Limits and No-Fly Zones All unmanned aerial vehicle (UAV) operators should abide by all regulations set forth by government and regulatory agencies including the ICAO and the FAA.
Phantom 4 Pro / Pro+ User Manual GPS Signal Strong Blinking Green Flight Limits DJI GO 4 App Aircraft Status Indicator Maximum Flight Altitude Aircraft's altitude cannot exceed the specified value. Warning: Height limit reached. None. Max Radius Flight distance must be within the max radius. Warning: Distance limit reached. Rapid red flashing when close to the max radius limit.
Phantom 4 Pro / Pro+ User Manual 1640 feet 66 feet 1 mile R1 R2 320 feet 1640 feet 66 feet 1 mile 320 feet R1 R2 Restricted Area 100 m 100m R R © 2016 DJI All Rights Reserved. 55 Flight (1) Restricted Areas does not have flight altitude restrictions. (2) R miles around the designated restriction area is a Take-off Restricted area. Aircraft cannot take off within this zone. The value of R varies based on the definition of the restricted areas.
Phantom 4 Pro / Pro+ User Manual GPS Signal Strong Zone No-fly Zone Flight Restrictedaltitude flight zone Warning zone Free zone Blinking Green Restriction DJI GO 4 app Prompt Motors will not start. Warning: You are in a No-fly zone. Take off prohibited. If the aircraft enters the restricted area in A-mode, but is switched to P-mode, the aircraft will automatically descend, land, and stop its motors. Warning: You are in a no-fly zone. Automatic landing has begun.
Phantom 4 Pro / Pro+ User Manual Calibrating the Compass Only calibrate the compass when the DJI GO 4 app or the status indicator prompt you to do so. Observe the following rules when calibrating your compass: DO NOT calibrate your compass where there is a chance of strong magnetic interference, such as magnetite, parking structures, and steel reinforcements underground. DO NOT carry ferromagnetic materials with you during calibration such as cellular phones.
Phantom 4 Pro / Pro+ User Manual 4. Re-calibrate the aircraft if the aircraft status indicators blink red. If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your aircraft to a different location and try again. DO NOT calibrate the compass near metal objects such as a metal bridge, cars, scaffolding. If the aircraft status indicators are blinking red and yellow alternately after placing the aircraft on the ground, the compass has detected magnetic interference.
Phantom 4 Pro / Pro+ User Manual Starting/Stopping the Motors Starting the Motors A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the bottom inner or outer corners to start the motors. Once the motors have started spinning, release both sticks simultaneously. OR Stopping the Motors OR Method 1 Method 2 Stop the Motor Mid-flight Pull the left stick to the bottom inside corners and press the RTH button at the same time.
Phantom 4 Pro / Pro+ User Manual Flight Test Takeoff/Landing Procedures 1. 2. 3. 4. 5. 6. 7. 8. 9. Place the aircraft in an open, flat area with the battery level indicators facing towards you. Turn on the remote controller and your mobile device, then turn on the Intelligent Flight Battery. Launch the DJI GO 4 app and enter the Camera page. Wait until the Aircraft Indicators blink green. This means the Home Point is recorded and it is now safe to fly.
Appendix © 2016 DJI All Rights Reserved.
Appendix Specifications Aircraft Weight (Battery & Propellers Included) 1388 g Diagonal Size (Excluding Propellers) 350 mm Max Ascent Speed Sport mode: 19.7ft/s(6 m/s); GPS mode: 16.4ft/s(5 m/s) Max Descent Speed Sport mode: 13.1ft/s(4 m/s); GPS mode: 9.
Phantom 4 Pro / Pro+ User Manual Camera 1’’ CMOS; Effective pixels: 20 M Lens FOV (Field of View) 84°, 8.8 mm (35 mm format equivalent: 24 mm), f/2.
Phantom 4 Pro / Pro+ User Manual Remote Controller Operating Frequency Max Transmission Distance Operating Temperature Battery Transmitter Power ( EIRP ) Operating Voltage Video Output Port Mobile Device Holder 2.400 - 2.483 GHz and 5.725 - 5.825 GHz 2.400 - 2.483 GHz (Unobstructed, free of interference) FCC: 4.3 mi (7 km); CE: 2.2 mi (3.5 km); SRRC: 2.5 mi (4 km) 5.725 - 5.825 GHz (Unobstructed, free of interference) FCC: 4.3 mi (7 km); CE: 1.2 mi (2 km); SRRC: 2.
Phantom 4 Pro / Pro+ User Manual For Phantom 4 Pro+, connect the Micro USB port of the aircraft and the remote controller with the USB OTG cable. 3. Follow the on-screen instructions in the DJI GO 4 app to upgrade. Ensure the Internet is available during upgrading. 4. Restart the aircraft after the firmware upgrade is complete. Upgrading the Remote Controller Firmware Method 1: Using the DJI GO 4 App Power on the remote controller and connect it with the DJI GO 4 app.
Phantom 4 Pro / Pro+ User Manual After-Sales Information Visit the following pages to learn more about After-sales policy and warranty information: 1. After-sales Policy: http://www.dji.com/service 2. Refund Policy: http://www.dji.com/service/refund-return 3. Paid Repair Service: http://www.dji.com/service/repair-service 4. Warranty Service: http://www.dji.com/service/warranty-service Compliance Information FCC Compliance Notice This device complies with Part 15 of the FCC Rules.
Phantom 4 Pro / Pro+ User Manual IC Radiation Exposure Statement: This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
Phantom 4 Pro / Pro+ User Manual EU-Compliance: Hiermit erklärt SZ DJI TECHNOLOGY CO., LTD., dass dieses Gerät den wesentlichen Anforderungen und anderen einschlägigen Bestimmungen der EU-Richtlinie 1999/5/EC entspricht. Eine Kopie der EU-Konformitätserklärung finden Sie online auf www.dji.com/euro-compliance. EU contact address: DJI GmbH, Industrie Strasse. 12, 97618, Niederlauer, Germany CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DJI Support http://www.dji.com/support This content is subject to change. Download the latest version from http://www.dji.com/product/phantom-4-pro If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. PHANTOMTM is a trademark of DJI. Copyright © 2016 DJI All Rights Reserved.
