Owner's Manual

& The accessories mentioned in the OJI Pocket 2 Charging Case User Guide are
all sold separately except for those fisted under In The Box.
3. Place OJI Pocket 2 in the Charging Case as shown below. Make sure to position the
camera as illustrated below and that the universal port of OJI Pocket 2 is attached to
the side of the Charging Case. Toggle the switch to secure OJI Pocket 2,
>
4 Close the Charging Case manually to charge OJI Pocket 2. Note that OJI Pocket 2
will not charge while the Charging Case is open.
5. To charge the Charging Case and OJI Pocket 2 simultaneously, connect the Power
Port (USB-C) of the Charging Case to an external power source.
Lt, Every time you open and close the Charging Case, the Status Indicator will show
the current battery level. Refer to the Status LED Descriptions section for more
information.
The capacity information on the case is visible when the Charging Case is being closed.
l.
Status LED Descriptions
Charging Indicator Descriptions
Both the Charging Case and OJI Pocket 2 will be charged if an external power source
connected. When no external power source is connected, only OJI Pocket 2 will be
charged. Refer to the table below for more information.
Charging Status
LED Blinking Pattern Battery Level
Pulses yellow Charging Case (0-60%)
Charging Case
Charging
Pulses green Charging Case (61-99%)
Case Status
only
Indicator
Solid green for 1 min and
turns off
Fully charged
Pulses yellow Charging Case (0-60%)
Charging Case Charging
Pulses green
Charging Case (61-99%)
and OJI Pocket 2 Case Status
simultaneously Indicator
Charging Case is fully charged.
Sofld green
OJI Pocket 2 is still charging
3