OSMO ACTION User Manual v1.0 2019.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this Manual 2 Legend 2 Read Before First Use 2 Downloading the DJI Mimo App 2 Introduction 4 Overview 4 Attaching the Battery 5 Activating Osmo Action 5 Charging Osmo Action 6 Operation 6 Button Features 6 Operating the Touchscreen 8 Storing Photos and Videos 10 Status LED Descriptions 10 DJI Mimo App 11 Updating Firmware 13 Maintenance 14 Underwater Usage Notes 14 Clean Notes 14 Specifications 15 After-Sales Information 15 © 2019 DJI OSMO All Rights
OSMO ACTION User Manual Introduction Osmo Action is a dual screen action camera equipped with DJI’s latest RockSteady EIS technology and can shoot sharp 12MP photos, capture stable video at up to 4K/60fps, and is also able to record HDR video. The back screen is a hyper-responsive touchscreen that enables users to change settings while the front screen helps to take the perfect selfie.
OSMO ACTION User Manual Attaching the Battery The camera frame is mounted by default and must be removed before attaching the battery. Insert the battery as shown. Press both sides of the battery to make sure it is properly inserted. Note that if the battery is properly inserted, the orange marks on either side of the battery are not visible.
OSMO ACTION User Manual Charging Osmo Action Press the cover release button on the USB-C cover and slide the cover down. To charge Osmo Action, connect a USB adapter (not included) to the USB-C port using the power cable (included). The status LEDs are solid red while charging. The battery is fully charged when the status LEDs turn off. Charging time: approx.
OSMO ACTION User Manual Power Button When Osmo Action is powered off, press the power button to power on. When Osmo Action is recording or connected to DJI Mimo, press the power button to turn off the touchscreen. Press again to turn on the touchscreen. Note that if Osmo Action is recording when the touchscreen is turned off, it will continue to record. When Osmo Action is idle while powered on and not connected with DJI Mimo, press the power button to enter sleep mode. Press again to exit sleep mode.
OSMO ACTION User Manual Operating the Touchscreen The following instructions are only applicable to the touchscreen. They will not work on the front screen. Swipe Down Create/Manage Custom Mode Tap and tap the icon again to save the current configuration as a custom mode. Up to five custom modes can be saved. Swipe left and right to choose a saved custom mode. Tap Delete in the bottomright corner to delete a mode. Brightness Tap and move the slider to adjust the brightness.
OSMO ACTION User Manual 9. LED: turn the two status LEDs on Osmo Action on or off. 10. Language: set the language to English, Simplified Chinese, Traditional Chinese, Japanese, Korean, German, or French. 11. Date/Time: tap to set date and time. 12. Format SD Card: tap to format microSD card. 13. Factory Reset: tap to reset default settings. 14. About: tap to view name, serial number, firmware version, and regulatory info. Screen Flip Tap AUTO to switch the screen orientation to up, down, or automatic.
OSMO ACTION User Manual Swipe Right Swipe right and then swipe left or right to scroll through photos and videos. Tap to playback videos. Tap the corresponding icon to add favorites or delete photos or videos. Tap at the top left top to view photo and videos by category. When viewing a photo, move the slider on the left side of the screen up or down to adjust the brightness. Tap the icon 16:9 in the bottom-middle to view timed and burst photos.
OSMO ACTION User Manual Blinking Patterns Descriptions Solid green Ready to use. Off No microSD card detected or insufficient microSD card storage. Osmo Action is powered on while charging. Solid red A USB is connected to Osmo Action or Osmo Action is powered off while charging. Blinks red twice quickly High-temperature warning, low battery level warning, battery abnormality, or microSD card abnormality (no microSD card detected, microSD card storage is full, or microSD card error.
OSMO ACTION User Manual Camera View 1 2 3 5 25:56 PANO 66:66 4 PANO PHOTO AUTO TIMELAPSE VIDEO PHOTO VIDEO 11 2.7K 60 10 1/8000 6400 6400 +3.0 +3.0 9 8 TIMELAPSE 1/8000 6 7 1. Home : tap to return to home page. 2. Wi-Fi : displays Wi-Fi connection. 3. Battery Level : displays current battery level of Osmo Action. 4.
OSMO ACTION User Manual Shooting Mode Settings Timelapse Dewarp, Format, White Balance, ISO Max, Anti-Flicker, Grid, Overexposure Alert, and Histogram Slow Motion Video Format, White Balance, ISO Max, Color, Grid, Overexposure Alert, and Histogram HDR Video Dewarp, Video Format, White Balance, Grid, Overexposure Alert, and Histogram Video Dewarp, RockSteady*, Video Format, White Balance, ISO Max, Color, Anti-Flicker, Grid, Overexposure Alert, and Histogram Photo Dewarp, Photo Format, Photo Ratio
OSMO ACTION User Manual Maintenance Underwater Usage Notes 1. Make sure the battery and battery compartment are dry and clean before inserting the battery. Otherwise, it may affect the battery contacts and waterproofing. Make sure the battery is properly inserted during use. Note that if the battery is properly inserted, the orange marks on either side of the battery cannot be seen. 2. Make sure the USB-C cover is clean and closed before using. Otherwise, it will affect the device’s waterproofing ability.
OSMO ACTION User Manual Specifications Model AC001 Wi-Fi Operating Frequency Transmitter Power (EIRP) Protocol 2.400-2.4835 GHz, 5.725-5.850 GHz* (FCC/CE/SRRC) 2.400-2.4835 GHz (MIC) 2.4 GHz: ≤19 dBm (FCC/CE/SRRC/MIC) 5.8 GHz: ≤13 dBm (CE), ≤19 dBm (FCC/SRRC) 802.11a/b/g/n/ac Bluetooth Operating Frequency 2.400-2.4835 GHz Transmitter Power (EIRP) 4 dBm Protocol BLE 4.2 Battery Capacity 1300 mAh Voltage 3.85 V Charging Limit Voltage 4.4 V Type LiPo 1S Energy 5.005 Wh * 5.
This content is subject to change. Download the latest version from www.dji.com/osmo-action OSMO is a trademark of DJI. Copyright © 2019 DJI OSMO All Rights Reserved.
