User Manual

OSMO ACTION User Manual
© 2019 DJI OSMO All Rights Reserved.
5
Attaching the Battery
The camera frame is mounted by default and must be removed before attaching the battery.
Activating Osmo Action
Insert the battery as shown. Press both sides of the battery to make sure it is properly inserted. Note
that if the battery is properly inserted, the orange marks on either side of the battery are not visible.
When using Osmo Action, activation is required through DJI Mimo. Follow the steps below to
activate.
1. Press and hold the power button to power on.
2. Enable Bluetooth on your mobile device.
3. Launch DJI Mimo and tap in the top-left corner, and follow the instructions to activate Osmo
Action.