Mini 3 Pro - Fly More Kit Plus - User Guide v1.0

EN
DJI Mini 3 Pro Two-Way Charging Hub (Figure A)
1.
Status LEDs:
The status LEDs display battery levels for three seconds after the batteries
are inserted into the charging hub. The LEDs in an array blink successively during
charging and change to solid green after the corresponding battery is fully charged.
2.
Function Button:
Press to check the battery power level. When both the intelligent ight
battery and an external device are connected for charging, the battery will be charged
before the external device. Press and hold the function button for two seconds to switch
the charging priority.
Place the charging hub on a at and stable surface when in use. Make sure the
device is properly insulated to prevent re hazards.
DO NOT attempt to touch the metal terminals on the hub. Clean the metal terminals
with a clean, dry cloth if there is any noticeable buildup.
Visit https://www.dji.com/mini-3-pro/downloads and refer to the DJI
TM
Mini 3 Pro User Manual for
more information.
Specications
Model Number CHX162-30
Supported Charger USB Power Delivery charger
Input (USB-C)
®
5 V 3 A, 9 V 3 A, 12 V 3 A
Output (USB) 5 V
2 A
Operating Temperature 5° to 40° C (41° to 104° F)
DJI Mini 3 Pro Propellers (Figure B)
Mount the marked propellers to the marked motors and the unmarked propellers
to the unmarked motors.
Use the screwdriver provided in the aircraft package to remove and install the
screws. Unsuitable screwdrivers may damage the screws.
Use the new screws provided with the propellers when installing. DO NOT reuse old
screws.
Use two propellers from the same package. DO NOT mix with propellers from
other packages.
DJI Mini 3 Pro Intelligent Flight Battery Plus
The weight of the aircraft exceeds 250 g after the DJI Mini 3 Pro Intelligent Flight
Battery Plus is installed. Make sure you understand and comply with local laws and
regulations and, if required, have obtained corresponding approval and clearance
from the related government agencies before ight.
When ying higher than 3,000 m (9,843 ft) above sea level with the DJI Mini 3 Pro
Intelligent Flight Battery Plus installed, the ight performance of the aircraft will be
limited (such as ight height and ight speed). To ensure ight safety, only y below
3,000 m (9,843 ft) above sea level and y with caution while maintaining VLOS (visual
line of sight) of the aircraft at all times.
Increased aircraft weight affects the ight power. To avoid power shortage, do not
install other payloads (such as propeller guards) after the DJI Mini 3 Pro Intelligent
Flight Battery Plus is installed.
4