Mavic 3 - User Manual v1.0
Table Of Contents
- Using this Manual
- Product Profile
- Using for the First Time
- Introduction
- Diagram
- Aircraft
- Gimbal and Camera
- Intelligent Flight Battery
- Flight Recorder
- Advanced Pilot Assistance Systems (APAS 5.0)
- Vision Systems and Infrared Sensing System
- Return to Home
- Aircraft Status Indicators
- Flight Modes
- Propellers
- Remote Controller
- Linking the Remote Controller
- RC-N1
- DJI RC Pro
- DJI Fly App
- Camera View
- Home
- Flight
- Flight Test
- Starting/Stopping the Motors
- Auto Takeoff/Landing
- Pre-Flight Checklist
- Flight Limits and GEO Zones
- Flight Environment Requirements
- Appendix
- After-Sales Information
- Firmware Update
- Specifications
DJI Mavic 3 User Manual
7
©
2021 DJI All Rights Reserved.
Using for the First Time
DJI Mavic 3 is folded before being packaged. Follow the steps below to unfold the aircraft and remote
controller.
Preparing the Aircraft
1. Remove the storage cover.
2
1
2. All Intelligent Flight Batteries are in hibernation mode before delivery to ensure safety. Use the
provided charger to charge and activate the Intelligent Flight Batteries for the first time. It takes
approximately 1 hour and 36 minutes to fully charge an Intelligent Flight Battery.
3. Unfold the front arms, followed by the rear arms, and then the propeller blades.
Make sure to unfold the front arms before unfolding the rear arms.
Make sure the storage cover is removed and all arms are unfolded before powering on the aircraft.
Otherwise, it may aect the aircraft self-diagnostics.
Attach the storage cover when the aircraft is not in use.