Mavic 3 - User Manual v1.0
Table Of Contents
- Using this Manual
- Product Profile
- Using for the First Time
- Introduction
- Diagram
- Aircraft
- Gimbal and Camera
- Intelligent Flight Battery
- Flight Recorder
- Advanced Pilot Assistance Systems (APAS 5.0)
- Vision Systems and Infrared Sensing System
- Return to Home
- Aircraft Status Indicators
- Flight Modes
- Propellers
- Remote Controller
- Linking the Remote Controller
- RC-N1
- DJI RC Pro
- DJI Fly App
- Camera View
- Home
- Flight
- Flight Test
- Starting/Stopping the Motors
- Auto Takeoff/Landing
- Pre-Flight Checklist
- Flight Limits and GEO Zones
- Flight Environment Requirements
- Appendix
- After-Sales Information
- Firmware Update
- Specifications
DJI Mavic 3 User Manual
39
©
2021 DJI All Rights Reserved.
Advanced Feature
Calibrating the Compass
The compass may need to be calibrated after the remote controller is used in areas with electromagnetic
interference. A warning prompt will appear if the compass of the remote controller requires calibration.
Tap the warning prompt to start calibrating. In other cases, follow the steps below to calibrate your
remote controller.
1. Enter the home screen.
2. Select Settings, scroll down, and tap Compass.
3. Follow the diagram on the screen to calibrate your remote controller.
4. The user will receive a prompt when the calibration is successful.
HDMI Settings
The touchscreen can be shared to a display after connecting the HDMI port of the remote controller.
The resolution can be set by entering Settings, Display, and then Advanced HDMI.