Air 2S User Manual v1.0

DJI Air 2S User Manual
44
©
2021 DJI All Rights Reserved.
Make sure to fully charge your mobile device before launching DJI Fly.
Mobile cellular data is required when using DJI Fly. Contact your wireless carrier for data
charges.
If you are using a mobile phone as your display device, DO NOT accept phone calls or use
texting features during ight.
Read all safety tips, warning messages, and disclaimers carefully. Familiarize yourself with
the related regulations in your area. You are solely responsible for being aware of all relevant
regulations and ying in a way that is compliant.
a. Read and understand the warning messages before using the auto-take o and auto-landing.
b. Read and understand the warning messages and disclaimer before setting the altitude beyond the
default limit.
c. Read and understand the warning messages and disclaimer before switching between ight
modes.
d. Read and understand the warning messages and disclaimer prompts near or in GEO zones.
e. Read and understand the warning messages before using the Intelligent Flight modes.
Land the aircraft immediately in a safe location if prompted to do so in the app.
Review all warning messages on the checklist displayed in the app before each ight.
Use the in-app tutorial to practice your ight skills if you have never operated the aircraft or if you
do not have sufficient experience to operate the aircraft with confidence.
Cache the map data of the area where you intend to y the aircraft by connecting to the internet
before each ight.
The app is designed to assist your operation. Use your sound discretion and DO NOT rely on
the app to control your aircraft. Your use of the app is subject to DJI Fly Terms of Use and DJI
Privacy Policy. Read them carefully in the app.
Drag a box around a subject in the camera view to enable FocusTrack. Press and hold on the screen to bring
up the gimbal adjustment bar to adjust the gimbal angle.
Tap on the screen to enable focus or spot metering. Focus or spot metering will display dierently depending
on the focus mode, exposure mode, and spot metering mode. After using spot metering, press and hold on
the screen to lock the exposure. To unlock the exposure, press and hold on the screen again
.