Air 2S User Manual v1.0
DJI Air 2S User Manual
32
©
2021 DJI All Rights Reserved.
Camera Prole
DJI Air 2S uses a 1-inch CMOS sensor camera, which can shoot 5.4K 30 fps, 4K 60fps, and 1080p
120 fps video and 20MP photos. It also supports shooting modes such as SmartPhoto, Slow Motion,
MasterShots, QuickShots, Hyperlapse, and Panorama. The aperture of the camera is f2.8 and can
shoot at 0.6 m to innity.
Make sure the temperature and humidity is suitable for the camera during usage and storage.
Use a lens cleanser to clean the lens to avoid damage.
DO NOT block any ventilation holes on the camera as the heat generated may damage the
device and hurt the user.
Do not remove the microSD card from the aircraft while it is powered on. Otherwise, the microSD
card may be damaged.
To ensure the stability of the camera system, single video recordings are limited to 30 minutes.
Check camera settings before use to ensure they are configured as desired.
Before shooting important photos or videos, shoot a few images to test the camera is operating
correctly.
Photos or videos cannot be transmitted or copied from the camera if the aircraft is powered off.
Make sure to power off the aircraft correctly. Otherwise, your camera parameters will not be
saved and any recorded videos may be damaged. DJI is not responsible for any failure of an
image or video to be recorded or having been recorded in a way that is not machine-readable.
Storing Photos and Videos
DJI Air 2S supports the use of a microSD card to store photos and videos. A UHS-I Speed Grade 3
rating microSD card is required due to the fast read and write speeds necessary for high-resolution
video data. Refer to the Specifications section for more information about recommended microSD
cards.