Owner's Manual

©
2021 DJI All Rights Reserved.
9
DJI Mini SE User Manual
Activation
DJI Mini SE requires activation before using for the rst time. After powering on the aircraft and remote
controller, follow the on-screen instructions to activate DJI Mini SE using DJI Fly. An internet connection
is required for activation.
aircraft is performing a QuickShot, Intelligent
RTH, or auto landing, press once to make the
aircraft exit the procedure and hover in place.
Press and hold the button to initiate RTH. The
aircraft returns to the last recorded Home Point.
Press again to cancel RTH.
6. Remote Controller Cable
Connect to a mobile device for video linking via
the remote controller cable. Select the cable
according to the mobile device.
7. Video-Downlink/Power Port (Micro USB)
Connect to a mobile device for video linking via
the remote controller cable. Connect to the USB
charger to charge the remote controller battery.
8. Control Sticks Storage Slots
For storing the control sticks.
9. Mobile Device Clamps
Used to securely mount your mobile device to
the remote controller.
10. Gimb
al Dial
Controls the camera's tilt.
1
1. Re
cord Button
In video mode, press once to start recording.
Press again to stop recording. In photo mode,
press once to switch to video mode.
12. S
hutter Button
In photo mode, press once to take a photo
according to the mode selected in DJI Fly. In
video mode, press once to switch to photo
mode.