User Manual

Mavic Air 2

User Manual

Unfold the front arms before unfolding the rear arms.

Make sure the gimbal protector is removed and all arms are unfolded before powering on the

aircraft. Otherwise, it may aect the aircraft self-diagnostics.

Preparing the Remote Controller

1. Remove the control sticks from their storage slots on the remote controller and screw them into

place.

2. Pull out the mobile device holder. Choose an appropriate remote controller cable based on the

type of mobile device. A Lightning connector cable, Micro USB cable, and USB-C cable are

included in the packaging. Connect the end of the cable with the phone logo to your mobile

device. Make sure the mobile device is secured.

If a USB connection prompt appears when using an Android mobile device, select the option to

charge only. Otherwise, it may result in connection failure.

4. All Intelligent Flight Batteries are in hibernation mode before shipment to ensure safety. Use the provided

charger to charge and activate the Intelligent Flight Batteries for the ﬁrst time. It takes approximately 1

hour and 35 minutes to fully charge an Intelligent Flight Battery.