Owner's Manual

Mavic Air
2
User Manual
52
©
2020 DJI All Rights Reserved.
Make sure follow all the steps to update firmware. Otherwise, the update may fail.
The firmware update will take approximately 10 minutes. It is normal that the gimbal goes
limp, aircraft status indicators blink, and the aircraft reboots. Wait patiently until the update is
complete.
Make sure the computer has access to the internet.
Before performing an update, make sure the Intelligent Flight Battery is at least 40% charged
and the remote controller is at least 30% charged.
Do not disconnect the aircraft from the computer during an update.
After-sales Information
Visit https://www.dji.com/support to learn more about after-sales service policies, repair services, and support.