Owner's Manual
Mavic Air 2
User Manual
©
2020 DJI All Rights Reserved.
13
Smart RTH
If the GPS signal is sucient, Smart RTH can be used to bring the aircraft back to the Home Point. Smart RTH
is initiated either by tapping in DJI Fly or by pressing and holding the RTH button on the remote controller
until it beeps. Exit Smart RTH by tapping in DJI Fly or by pressing the RTH button on the remote controller.
Smart RTH includes Straight Line RTH and Power Saving RTH.
Straight Line RTH Procedure:
1. The Home Point is recorded.
2. Smart RTH is triggered.
3. a. If the aircraft is further than 20 m from the Home Point when the RTH procedure begins, the aircraft
adjusts its orientation and ascends to the preset RTH altitude and ies to the Home Point. If the current
altitude is higher than the RTH altitude, the aircraft ies to the Home Point at the current altitude.
b. If the aircraft is at a distance of 5 m to 20 m from the Home Point when the RTH procedure begins, the
aircraft adjusts its orientation and ies to the Home Point at the current altitude.
c. If the aircraft is less than 5 m from the Home Point when the RTH procedure begins, it lands immediately.
4. After reaching the Home Point, the aircraft lands and the motors stop.
If the RTH is triggered through DJI Fly and the aircraft is further than 5 m from the Home Point,
a prompt will appear in the app for users to select a landing option.
Power Saving RTH Procedure
:
During Straight Line RTH, if the distance is too far and the altitude is too high from the Home Point, the aircraft
will enter Power Saving RTH in order to save power.
Power Saving RTH is triggered automatically. The aircraft calculates the best distance and angle (16.7°
horizontally) and then ies to the Home Point. When the aircraft reaches 50 m above the Home Point, it lands
and the motors stop after landing.
50 m
Area of where Power Saving RTH is triggered
Aircraft triggers Power Saving RTH
Descent of aircraft in
Power Saving RTH