Owner's Manual
Disclaimer and Warning
Please read this entire
document
and
all safe
and
lawful
practices
DJl
1
M
provided
carefully
before use. Failure to read
and
follow instructions
and
warnings
may
result in serious inJury to
yourself or others,
damage
to
your OJI product,
or
damage
to other objects in the vicinity. By
using this product, you hereby signify that
you
have read this disclaimer
and
warning carefully
and
that you understand
and
agree
to
abide
by
the terms
and
conditions herein You
agree
that
you
are
solely
responsible
for
your
own
conduct
while
using
this
product,
and
for
any
consequences
thereof. OJI
accepts
no
liability for
damage,
injury
or
any
legal responsibility
incurred directly
or
indirectly from the use
of
this
product
This document and all other collateral documents are subject to
change
at the sole discretion
of
OJI.
Introduction
The MAVICrM Mini 360° Propeller Guard Is used to effectively protect people and objects from
the aircraft's propellers during use
I nsta nation
Make sure all frame arms are unfolded before installing the propeller guard.
DO
NOT fold the
frame arms with the propeller guard installed.
1. Release the locks on the underside of the propeller
guard
2.
Rotate the propellers so that they are positioned directly above the frame arms
3
Check
the mark on the locks of the propeller guard
and
make
sure they are marked FL (Front
Left)
and
BL (Back Left). Insert the front
and
rear frame arms
of
the aircraft's left side through
the
open
side
of
the propeller guard
and
into the corresponding mounting hole First tilt the
front frame arm to
help
the landing
gear
pass through the mounting hole.
4. Make sure the frame arms are properly positioned
in
the mounting holes
and
close the locks.
A clicking sound indicates the lock is properly secured.
5.
Repeat the steps above
to
install the propeller guard on the right side Note that the mark will
be
FR
(Front Right)
and
BR
(Back Right) for this side.
& • The weight of the aircraft exceeds 250 g after the
Mav1c
Mini 360° Propeller Guard Is
installed Make sure you understand
and
comply
with the local laws
and
regulations
and
if required, have obtained corresponding approval and clearance from the related
government agencies before
flight
• After installing the propeller
guards,
hover the aircraft until OJI Fly indicates that the
payload
has
been
detected,
and
the
payload
mode
Is enabled. It the status of the
payload
mode
in OJI Fly does not match the actual situation, turn it on or off manually in
the app.
• After installing the propeller guards, the maximum flight speed (no wind) is limited to 18
mph (29 kph), and the aircraft's max
seNice
ceiling above sea level
Is
1500 m.
Ma1nta1n
visual line of sight of your aircraft even when using the propeller guards. To ensure flight
safety, the flight height will
be
limited to no more than 120 m,
and
the distance is no more
than 100 m
Specifications
Weight (one side)
Radius
Installation Circumference
2
23.1 g
71
mm
318 x 267 x 66
mm