User's Manual
Table Of Contents
- Using this Manual
- Contents
- Product Profile
- Preparing the Smart Controller
- Smart Controller Operations
- Display Interface
- Appendix
- Changing Storage Locations for Images and Videos
- Control Stick Navigation
- DJI GO Share (only available when using DJI GO 4)
- Status LED and Battery Level Indicators Description
- Smart Controller Warning Sounds
- System Update
- Button Combinations
- Calibrating the Compass
- Blocking Third-party Notifications
- HDMI
- After-sales Information
- Specifications
©
2020 DJI All Rights Reserved.
21
DJI Smart Controller User Manual
Blocking Third-party Notications
To ensure safe ight, we recommend to disable third-party notications before each ight. Follow
the steps below to disable third-party notications.
1. Enter the App Center, tap
, and scroll down and tap Notications.
2. Enable “Aerial Photography Do Not Disturb Mode”.
HDMI
A monitor can display the remote controller’s interface by connecting the remote controller to a
monitor using a HDMI cable. Follow the steps below to enable the HDMI connection.
1. Swipe down from the top of the screen to open Quick Settings.
2. Follow the diagram on the screen to calibrate your remote controller. Tap HDMI to enable or
disable the HDMI connection. Hold to enter settings and adjust HDMI resolution, rotation, output
mode, and screen zoom.
After-sales Information
Please visit http://www.dji.com/support for more information about after-sales service and warranty
policies.