User's Manual
Table Of Contents
- Using this Manual
- Contents
- Product Profile
- Preparing the Smart Controller
- Smart Controller Operations
- Display Interface
- Appendix
- Changing Storage Locations for Images and Videos
- Control Stick Navigation
- DJI GO Share (only available when using DJI GO 4)
- Status LED and Battery Level Indicators Description
- Smart Controller Warning Sounds
- System Update
- Button Combinations
- Calibrating the Compass
- Blocking Third-party Notifications
- HDMI
- After-sales Information
- Specifications
10
©
2020 DJI All Rights Reserved.
DJI Smart Controller User Manual
Center position: Control sticks are centered.
Moving the control stick: Control sticks are pushed away from the center.
Control Stick Mode 2 Aircraft Remarks
Left Stick
UP
Down
Moving the left stick up or down changes the
aircraft’s altitude. Push the stick up to ascend and
down to descend. The more the stick is pushed
away from the center position, the faster the aircraft
changes altitude. Push the stick gently to prevent
sudden and unexpected changes in altitude.
Left Stick
Turn RightTurn Left
Moving the left stick to the left or right controls the
orientation of the aircraft. Push the stick left to rotate
the aircraft counter-clockwise and right to rotate
the aircraft clockwise. The more the stick is pushed
away from the center position, the faster the aircraft
rotates.
Right Stick
Forward
Backward
Moving the right stick up and down changes the
aircraft’s pitch. Push the stick up to y forward and
down to y backward. The more the stick is pushed
away from the center position, the faster the aircraft
moves.
Right Stick
RightLeft
Moving the right stick to the left or right changes the
aircraft’s roll. Push the stick left to y left and right to
y right. The more the stick is pushed away from the
center position, the faster the aircraft moves.
Keep the remote controller away from magnetic materials to avoid it being affected by
magnetic interference.
To avoid damage, it is recommended that the control sticks are removed and stored in
the storage slot on the remote controller during transportation or storage.
Flight Mode Switch
Toggle the switch to select the ight mode. Choose between T-mode, P-mode, and S-mode.