Owner's Manual

2. If the Smart Controller is powered on and has not been used for five minutes, it will
sound an alert. After six minutes, it will automatically power off. Move the sticks or
perform some other action to cancel the alert.
3. Ensure the antennas are unfolded and adjusted to the proper positiorn to achieve the
optimal transmission quality.
4. Contact OJI support to repair or replace the antennas if they are damaged. Damaged
antennas will greatly decrease performance.
5. Link the Smart Controller and the aircraft again if you change the aircraft.
6. Ensure to power off the aircraft before the Smart Controller.
7. Fully charge the Smart Controller every three months.
8. Immediately charge the Smart Controller when its power level decreases to 0% to
prevent the Smart Controller from damage due to over discharge for an extended
period. Discharge the Smart Controller to a power level between 40% and 60% if
stored for an extended period.
9. DO NOT cover the air vent or the air intake on the Smart Controller. Otherwise, the
Smart Controller may become too hot, which could affect its performance.
10. DO NOT disassemble the Smart Controller without the assistance of a OJI authorized
dealer. Always contact OJI or a OJI authorized dealer to replace the Smart Controller's
components.
Introduction
The OJI Smart Controller features OCUSYNC™ 2.0 technology, capable of controlling
aircraft<D that support the teclnnology, and providing a live HD view from the aircraft's
camera. It can transmit image data at distances of up to 8 km® and comes with a number
of aircraft and g1mbal controls as well as some customizable buttons.
The built-in 5.5-inch high brightness 1000 cd/m
2
screen has a resolution of 1920x1080
pixels, featuring an Android system with multiple functions such as Bluetooth and GNSS. It
supports to connect to the lntemet via Wi-Fi.
The Smart Controller has a maximum working time of 2.5 hours®·
3
•