Manualshelf

User Manual

ManualsBrandsDJI ManualsCamcordersMavic 2 Zoom
31323334353637383940
Mavic 2 Pro/Zoom User Manual
34
©
2018 DJI All Rights Reserved.
Intelligent Flight Battery
The Mavic 2 Intelligent Flight Battery is a 15.4 V, 3850 mAh battery with smart charging/discharging
functionality. Only use a DJI approved AC power adapter to charge the battery.
Intelligent Flight Battery AC Power Adapter
Battery Features
1. Battery Level Display: The LED indicators display the current battery level.
2. Auto-Discharging Function: To prevent swelling, the battery automatically discharges to less than
70% of the maximum battery level when it is idle for more than 10 days. It takes approximately three
to four days to discharge the battery to 60%. It is normal to feel moderate heat being emitted from
the battery during the discharging process.
3. Balanced Charging: During charging, the voltages of the battery cells are automatically balanced.
4. Overcharge Protection: The battery stops charging automatically once fully charged.
5. Temperature Detection: The battery only charges when the temperature is between 41° and 104° F (5°
and 40° C).
6. Overcurrent Protection: The battery stops charging if an excess current is detected.
7. Over-discharge Protection: Discharging stops automatically to prevent excess discharge.
8. Short Circuit Protection: The power supply is automatically cut if a short circuit is detected.
9. Battery Cell Damage Protection: DJI GO 4 displays a warning message when a damaged battery cell
is detected.
10. Hibernation Mode: The battery switches o after 20 minutes of inactivity to save power. If the
battery level is less than 10%, the battery enters Hibernation mode to prevent over-discharge. In
Hibernation mode, the battery level indicators do not illuminate. Charge the battery to wake it from
hibernation.
11. Communication: Information about the battery's voltage, capacity, and current is transmitted to the
aircraft.
Refer to the Mavic 2 Intelligent Flight Battery Safety Guidelines before use. Users take full responsibility
for all operations and usage.
Using the Battery
Low
High
Battery Level LEDs
Power Button