Item Brochure

Purchase the DJI Mavic 2 Zoom at www.tigersupplies.com.
Can I use other apps while updating the DJI GO 4 app? No. If you do, the update will fail.
You will then need to download the firmware and update it again.
Can I disconnect from the internet once the firmware has been downloaded? Yes.
What should I do if aircraft and battery firmware versions are inconsistent? Connect the
Mavic 2 to the DJI GO 4 app. The app will then check firmware compatibility automatically.
You may upgrade according to the instructions.
Does the Mavic 2's remote controller support hot swapping while connected to DJI
Assistant 2? No. You need to connect the remote controller with a USB cable and then
power on to connect to DJI Assistant 2.
What factors could lead to an update failure?
1. Low-battery level. Before installing an update, make sure the battery level is above
50%.
2. Powering off the Mavic 2 or the remote controller during an update. If this happens,
restart the Mavic 2 and the remote controller, and begin the update again.
3. Internet was disconnected during the firmware download. If the update failure
persists, or the remote controller does not link with the aircraft, there may be firmware
inconsistencies between devices. In this case, use DJI Assistant 2 on your computer to
update the aircraft and the remote controller to the latest versions separately.
UPDATING FIRMWARE