User Manual

DJI Smart Controller User Manual

Dual Remote Controller Mode

DJI Smart Controller supports Dual Remote Controller Mode when using with the Mavic 2 Pro/Zoom,

which allows two remote controllers to connect to the same aircraft.

Both the Primary remote controller and the Secondary remote controller can control the orientation

of the aircraft and the movement of the gimbal and camera operation.

Please note the different operations of the Primary and Secondary remote controller listed below.

1. Gimbal Dial

Both the Primary remote controller and the Secondary remote controller can control the gimbal

dial, but the Primary remote controller has priority. For example, the Secondary remote controller

is unable to control the gimbal dial when the Primary remote controller is using the gimbal dial.

After the Primary remote controller has stopped controlling the gimbal dial for two seconds or

more, the Secondary remote controller can control the gimbal dial.

2. Control Stick

Both the Primary remote controller and the Secondary remote controller can control the

orientation of the aircraft using control sticks. The Primary remote controller has priority. The

Secondary remote controller is unable to control the aircraft’s orientation when the Primary remote

controller is operating the control sticks. After the control sticks are idle for two seconds or more,

the Secondary remote controller can control the aircraft’s orientation.

If the control sticks on the Primary remote controller are pushed down and inward, the motors of

the aircraft stop. If the same action is performed on the Secondary remote controller, however,

the aircraft does not respond.

The control sticks on the Primary remote controller need to be released so that the Secondary

remote controller can control the aircraft.

3. Flight Mode Switch

TheightmodecanonlybeswitchedonthePrimaryremotecontroller.TheFlightModeSwitchis

disabled on the Secondary remote controller.

4. DJI GO 4 Settings

The display and parameter settings for the Primary and Secondary remote controllers in DJI GO

4arethesame.TheSecondaryremotecontroller can onlyconguretheightcontroller,vision

system, video transmission, and Intelligent Flight Battery. Display and parameter settings for the

Primary and Secondary remote controllers are the same in DJI GO 4.