User Manual

3
•
Maintain
visuallineofsight
of your aircraft at all times.
• DONOTanswerincomingcalls,text messages or do anythingthatmaydistractyou from
operatingyoursmartdevicetocontroltheaircraftduringight.
• DO NOT
y under the inuence of
alcohols
or
drugs
.
• DO NOT
y close to
reectivesurfaces
such as
water
or
snow
, as these types of terrain may
affect the performance of the vision system. Only y the aircraft in environments with good
lighting and visibility when GPS signal is weak.
•
Land the aircraft in a
safe location
when there is a
lowbatteryorhighwindwarning
.
•
Please set the Return-to-Home (RTH) Altitude at a level higher than surrounding obstacles using the
DJI GO 4 app.
•
The aircraft cannot avoid obstructions during RTH when the visual system is disabled. Use the remote
controller to control the aircraft's speed and altitude to avoid collisions during RTH.
•
After landing, rst stop the
motor
, then turn off the
IntelligentFlightBattery
, and then turn off the
remote controller
.
•
When using Intelligent Flight Modes, be prepared to take control of the aircraft by pushing the
sticks and pressing the Flight Pause button or tap the on-screen stop button. Please note that
the aircraft will continue performing the Intelligent Flight functions after you pushed the sticks.
Press the stop button on the screen to exit such on-going functions completely.
•
The pilot must pay attention and control the aircraft at all times during ight. Safety and ight
assistance features such as obstacle avoidance and precision landing are meant to assist the
pilot, not to replace their control of the aircraft.
•
Environmental conditions such as lighting and the surface texture of obstacles may impact the
performance of the visual system. Intelligent ight control features such as precision landing
and obstacle avoidance are disabled when the visual system's functions are impaired. Please
refer to the User Manual for more information.