User Manual

4
©
2019 DJI All Rights Reserved.
DJI Smart Controller User Manual
Overview
1
6
9999
1010101010101010101010101010
10
12
10
13
77
8
11
3
2
4
14
28
15
5
16
17
18
19
20
21
22
23
24
25
26
27
1 Antennas
Relays aircraft control and video signal.
2 Back Button / Function Button
Press once to return to the previous
page and press twice to go back to the
homepage. Hold to view a guide to using
button combinations. Refer to the Button
Combinations section for more information.
3 Control Sticks
Control the orientation and movement of the
aircraft when the remote controller is linked
to an aircraft. Go to Settings > Control Stick
Navigation, to customize the navigation
settings.
4 RTH Button
Press and hold to initiate Return to Home
(RTH). Press again to cancel RTH.
5 Flight Pause Button
Press once to exit TapFly, ActiveTrack, and
other Intelligent Flight Modes.
6 Flight Mode Switch
Switch between T-mode, P-mode, and
S-mode.
7 Status LED
Indicates the linking status and warnings for
the control sticks, low battery level, and high
temperature.
8 Battery Level LEDs
Displays the battery level of the remote
controller.
9 5D Button
 Thedefaultcongurationislistedbelow.The
functions can be set in DJI GO 4 / DJI Pilot.
Up: Recenter gimbal/move gimbal downward
Down: Focus switch/metering
Left: Decrease EV value
Right: Increase EV value
Press: Open DJI GO 4 / DJI Pilot Intelligent
Flight Modes menu (not available for Mavic 2
Enterprise series).
When the remote controller is not linked to an
aircraft, the 5D button can be used to navigate
on the remote controller. Go to Settings >
Control Stick Navigation to enable this function.
10 Power Button
Use to turn the remote controller on and off.
When the remote controller is powered on,
press the button to enter sleep mode or to
wake up the controller.
11 ConrmButton/CustomizableButtonC3*
When the remote controller is not linked to an
aircraft,presstoconrmaselection.When
linked to an aircraft, the button cannot be used
toconrmaselection.However,thefunction
of the button when linked to an aircraft can be
customized in DJI GO 4 / DJI Pilot.
*ThisConrmbuttoncanbecustomizedinfuturermware.