User Manual

©
2019 DJI All Rights Reserved.
11
DJI Smart Controller User Manual
位置T
位置S
位置P
Position Flight Mode
T T-mode (Tripod)
P P-mode (Positioning)
S S-mode (Sport)
T-mode (Tripod):
The aircraft utilizes GPS and vision systems to locate itself, stabilize, and navigate
betweenobstacles.Inthismode,themaximumightspeedislimitedto2.2 mph (3.6kph). The
responsiveness to stick movements is also reduced for smoother, more controlled movement.
P-mode (Positioning):
P-mode works best when the GPS signal is strong. The aircraft utilizes GPS,
Vision Systems, and an Infrared Sensing System to stabilize, avoid obstacles, and track moving
subjects. Advanced features such as TapFly and ActiveTrack are available in this mode.
S-mode (Sport):
The handling gain values of the aircraft are adjusted to enhance aircraft
maneuverability. Note that Vision Systems are disabled in this mode.
Regardless of the position the switch is in on the remote controller, the aircraft begins in P-mode
bydefault.Toswitchightmodes,rstgotocameraviewinDJIGO4/DJIPilot,tap and enable
“MultipleFlightModes”.Afterenablingmultipleightmodes,toggletheswitchtoPandthentoSor
Ttoswitchightmodes.
Refertotheightmodessectionin theaircraft’susermanualformoreinformationabout
ightmodefeaturesfordifferentaircrafttypes.
RTH Button
Press and hold the RTH button to start Return to Home (RTH) and the aircraft will return to the last
recorded Home Point. Press the button again to cancel RTH and regain control of the aircraft. Refer
to the Return to Home section in the aircraft’s user manual for more information about RTH.
Position T
Position P
Position S