User Manual

Mavic 2 Pro/Zoom User Manual

2 m

ActiveTrack 2.0

ActiveTrack 2.0 allows you to select an object on your mobile device screen. The aircraft adjusts its ight

to track the subject. No external tracking device is required. Mavic 2 Pro/Zoom can automatically identify

up to 16 objects and uses dierent tracking strategies to track people, vehicles, and boats.

Using ActiveTrack 2.

Ensure that the aircraft is in P-mode and that the Intelligent Flight Battery is suciently charged. Follow

the steps below to use ActiveTrack 2.0:

1. Take o and hover at least 6.6 ft (2 m) above the ground.

2. In DJI GO 4, tap , then select ActiveTrack 2.0.

3. For optimal performance, it is recommended to select a subject that is automatically recognized by

the aircraft. To do so, select a subject that has been recognized onscreen and tap to conrm your

selection. If the desired subject has not been recognized by the aircraft, drag a selection around it

onscreen and tap to select it manually. When the subject is selected manually, however, the ability of

the aircraft to track the subject may be aected. If the box turns red, the object cannot be identied

and it needs to be selected again.

4. The aircraft automatically avoids obstacles in its ight path. If the aircraft loses track of the subject

because it is moving too fast or is obscured, re-select the subject to resume tracking.

ActiveTrack

09:29

61%

ISO

SHUTTER

1600 0.31/8000 4K/244K/25

CAPACITY

In flight (GPS)

Trace

SpotlightParallel