User Manual

Mavic 2 Pro/Zoom User Manual

Intelligent Flight Battery

The Mavic 2 Intelligent Flight Battery is a 15.4 V, 3850 mAh battery with smart charging/discharging

functionality. Only use a DJI approved AC power adapter to charge the battery.

Intelligent Flight Battery AC Power Adapter

Battery Features

1. Battery Level Display: The LED indicators display the current battery level.

2. Auto-Discharging Function: To prevent swelling, the battery automatically discharges to less than

60% of the maximum battery level when it is idle for more than 10 days. It takes approximately

three to four days to discharge the battery to 65%. It is normal to feel moderate heat being

emitted from the battery during the discharging process.

3. Balanced Charging: During charging, the voltages of the battery cells are automatically balanced.

4. Overcharge Protection: The battery stops charging automatically once fully charged.

5. Temperature Detection: The battery only charges when the temperature is between 41° and 104°

F (5° and 40° C).

6. Overcurrent Protection: The battery stops charging if an excess current is detected.

7. Over-discharge Protection: Discharging stops automatically to prevent excess discharge.

8. Short Circuit Protection: The power supply is automatically cut if a short circuit is detected.

9. Battery Cell Damage Protection: DJI GO 4 displays a warning message when a damaged battery

cell is detected.

10. Hibernation Mode: The battery switches off after 20 minutes of inactivity to save power. If the

battery level is less than 10%, the battery enters Hibernation mode to prevent over-discharge.

In Hibernation mode, the battery level indicators do not illuminate. Charge the battery to wake

it from hibernation.

11. Communication: Information about the battery's voltage, capacity, and current is transmitted to

the aircraft.

Refer to the Mavic 2 Intelligent Flight Battery Safety Guidelines before use. Users take full responsibility

for all operations and usage.

Using the Battery

Battery Level LEDs

Power Button

Low

High