User Manual

Mavic 2 Pro/Zoom User Manual

Calibrating Vision System Cameras

The Vision System cameras installed on the aircraft are factory calibrated. If the aircraft experiences

a collision, however, it may require calibration via DJI Assistant 2 for Mavic or DJI GO 4.

The most accurate way to calibrate the Vision System cameras is by using DJI Assistant 2 for

Mavic. Follow the steps below to calibrate the Forward Vision System cameras, then repeat

the steps to calibrate other Vision System cameras.

Point the aircraft toward the screen

Align the boxes

Pan and tilt the aircraft

When a vision system calibration is required, DJI GO 4 sends a notification. If a computer is not

nearby, however, a quick calibration can be performed in the app. Tap the Aircraft Status bar and

Vision Sensors to start quick calibration.

Quick calibration is only a quick fix for vision system issues. When possible, connect the aircraft to a

computer to carry out a full calibration using DJI Assistant 2 for Mavic.

Only calibrate on textured surfaces such as grass or when lighting conditions are adequate.

Do not calibrate the aircraft on highly reflective surfaces such as marble or ceramic tiles.

Using the Vision Systems

The Downward Vision System and Infrared Sensing System activate automatically when the aircraft

is turned on. No further action is required. When using the Downward Vision System, the aircraft can

hover precisely even without GPS.

The Downward Vision System is typically used in indoor environments where GPS is unavailable. The

Downward Vision System works best when the aircraft is at altitudes of 1.6 to 33 ft (0.5 to 11 m). Please

note that the Vision Positioning function may be affected if the aircraft’s altitude is above 33ft (11 m).