User Manual

Can the Mavic 2's low-noise propellers be used on the Mavic Pro Platinum?
No, the sizes are different, and therefore cannot be used on the Mavic Pro Platinum.
Why are the maximum flight and hovering times different on the Mavic 2?
The Mavic 2's rotor system is optimized primarily for forward flight. Thanks to its more aerodynamic
airframe, the Mavic 2 consumes less power at certain forward flight speeds than when hovering.
Therefore, the maximum hovering time is 29 minutes in environments with no wind while the
maximum flight time can be up to 31 minutes flying at a constant speed in conditions with no wind.
Omnidirectional Obstacle Sensing
What is Omnidirectional Obstacle Sensing?
Omnidirectional Obstacle Sensing includes left/right, up/down, and forward/backward obstacle
sensing. Sensing for left/right directions is only available in ActiveTrack or Tripod Mode.
Note: Omnidirectional Obstacle Sensing does not fully cover the circumference of a 360-degree arc.
And the left and right obstacle sensing system only works in specific modes and environments. DJI
warranty does not cover any loss caused by crashing when flying left or right, even when ActiveTrack
or Tripod mode is activated. Please be aware of your surroundings and App notifications when
operating the Mavic 2 to ensure safety.
Can I manually turn on/off the Bottom Auxiliary Light located at the bottom of
the aircraft?
Yes. The Mavic 2's default setting has auto LED enabled, which turns the Bottom Auxiliary Light
on/off depending on the brightness of your environment. You can disable this feature in the app,
and you can also manually turn on/off the Bottom Auxiliary Light in the app.
Remote Controller & Video Transmission
How has the FHD video transmission of OcuSync 2.0 improved over the first
OcuSync?
OcuSync 2.0 supports both 2.4 GHz and 5.8 GHz frequency bands, featuring stronger interference
resistance and auto-switching capabilities to deliver 8 km 1080p video transmission feeds
(unobstructed, free of interference, and when FCC compliant).
What is the latency of OcuSync 2.0?
120–130 ms, which is 40–50 ms shorter than the first generation.
Does the remote controller support HDMI output?
No.
Can I connect my smartphone to the remote controller using an ordinary USB
cable?
You can use an ordinary USB cable to connect your smartphone to the remote controller via the USB
port at the bottom of the controller (be sure to pull up the cable at the Micro USB port). This might,
however, prove to be slightly inconvenient when flying the aircraft. Cables with different connectors
come with the aircraft so you can choose the one most appropriate for you.
Does the Mavic 2 support Wi-Fi control?
No. You can only control it using a remote controller.
What mobile devices does the remote controller support?