Instructions

DJI FPV
User Manual
35
© 2021 DJI All Rights Reserved.
Transmission
The video transmission of the current device can be set under Pilot settings. Nearby video transmission devices
and their signal strength can be viewed in Audience mode. Select a channel to see the camera view.
1. Broadcast Mode
Enable or disable Broadcast mode. The device number will be displayed when Broadcast mode is enabled
so that other devices can nd the device and enter the channel to watch the camera view.
2. Aspect Ratio
The aspect ratio of the video transmission screen can be adjusted.
3. Focus Mode
Set the Focus mode to on, o, or auto. If Focus mode is turned on, the center of the screen will be clearer
and the edges will be blurred.
4. Channel Mode
The channel mode can be set to auto or manual. It is recommended to select auto so that the video
transmission will intelligently switch between the 2.4 and 5.8 GHz frequency bands and select the channel
with the best signal.
5. Frequency
You can select 2.4 or 5.8 GHz frequency band if the channel mode is manual.
6. Bandwidth
Set the bandwidth of the video transmission. The number of channels available varies according to the
bandwidth. The channel with the best signal strength can be manually selected.
The larger the bandwidth, the more spectrum resources it occupies, which can provide a higher video
transmission rate and clearer image quality. However, there is a higher chance of wireless interference and
the amount of equipment that can be accommodated is more limited. To avoid interference in a multiplayer
competition, it is recommended to manually select a xed bandwidth and channel.
1
2
3
4
5
6