Instructions

DJI FPV

User Manual

The battery level LEDs display the power level of the ight battery during charging and discharging. The

statuses of the LEDs are dened below:

LED is on. LED is ashing. LED is o.

LED1 LED2 LED3 LED4 Battery Level

Battery Level > 88%

75% < Battery Level ≤ 88%

63% < Battery Level ≤ 75%

50% < Battery Level ≤ 63%

38% < Battery Level ≤ 50%

25% < Battery Level ≤ 38%

13% < Battery Level ≤ 25%

0% < Battery Level ≤ 13%

Powering On/O

Press the power button once and then press again and hold for two seconds to power the battery on or o. The

battery level LEDs display the battery level when the aircraft is powered on.

Low Temperature Notice

1. Battery capacity is signicantly reduced when ying in low-temperature environments of 14° to 41° F (-10° to 5°

C). It is recommended to hover the aircraft in place for a while to heat the battery. Make sure to fully charge the

battery before takeo.

2. Batteries cannot be used in extremely low-temperature environments lower than 14° F (-10° C).

3. When in low-temperature environments, end the ight as soon as the goggles display the low battery voltage

warning.

4. To ensure optimal performance, keep the battery temperature above 68° F (20° C).

5. The reduced battery capacity in low-temperature environments reduces the wind speed resistance

performance of the aircraft. Fly with caution.

6. Exercise extra caution when ying high above sea level.

In cold environments, insert the battery into the battery compartment and power on the aircraft to warm

up before taking o.

Charging the Battery

Use the provided DJI charger to fully charge the Intelligent Flight Battery before every ight.

1. Connect the AC power adapter to an AC power supply (100-240 V, 50/60 Hz).

2. Attach the Intelligent Flight Battery to the AC power adapter using the battery charging cable with the battery

powered o.