Matrice 30 Series - User Manual
Table Of Contents
- Using This Manual
- Product Profile
- Flight Safety
- Aircraft
- Remote Controller
- Starting and Activating the Remote Controller
- Remote Controller Overview
- Mounting the WB37 Intelligent Battery
- Mounting the Dongle
- Mounting the Strap and Bracket Kit
- Adjusting the Antennas
- IP Rating
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Advanced Dual Operator Mode
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Pilot 2 App
- Firmware Update
- Appendix
17
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
The infrared sensing systems may NOT detect the distance accurately in the following situations:
a. Flying over surfaces that can absorb sound waves (e.g., asphalt road surfaces).
b. A large area of strong reectors situated at a distance of more than 15 m (e.g., multiple trac signs
placed side by side).
c. Small obstacles (e.g., iron wires, cables, tree branches, or leaves).
d. Mirrors or transparent objects (e.g., water or glass).
e. In low-visibility environments (e.g., heavy fog or snow).
Keep the vision sensors clean at all times. Any dirt or stain may aect their function.
The vision system relies on surface patterns or texture to process image data and obtain
position information. Make sure the surrounding environment has sucient lighting and clearly
textured ground.
The vision system cannot function properly in dark environments and over surfaces without
clear patterns or texture such as water and ice.